4 Cell 1350 mAH
Pro Power 30C

1350mAH 4S Pro Power 30C battery pack

The 30C Pro Power Series Lithium Polymer batteries use state of the art battery chemistry to provide high voltage under load and unmatched capacity vs weight. These LiPoly batteries from Thunder Power RC are optimized to have the lightest weight for their capacity. The Pro Power 30C series offers great value, low weight, and is perfect for applications like R/C 3D helicopters, ducted fan jets, RC cars and boats.

These new LiPoly packs are similar in size and weight to most 20-25C continuous discharge rate LiPoly batteries and 5-15% lighter than most other 30C continuous discharge rate LiPoly batteries.

LiPoly batteries not only perform well, they are also safe when you can carry out comprehensive pack maintenance using the balancing connector. Used with Thunder Power's 205V balancer for packs up to 5 cells or the 210V balancer for packs up to 10 cells, you can ensure that each cell is properly balanced and matched to give optimal performance and safely for their entire life.

The TP1010C is the recommended charger, which allows you to charge at up to 3C (3 times faster than the standard 1C, 1 hour charge) when used with a Thunder Power balancer, for fast charging times. Always follow the recommended safety guidelines when charging LiPo batteries.

Features:

Increased flight time (about twice that of comparable NiMH packs)

Significantly lighter than NiMH or NiCd packs

Smaller physical size to easily fit in your RC aircraft

Holds its charged voltage for weeks (no need to top-off)

No memory effect

Able to supply peak current at high rates

Continuous Discharge Current:	30C - 41 Amps
Burst Discharge Current:	60C - 81 Amps
Voltage:	14.8 Volts
Dimensions (H x W x L):	.94 x 1.22 x 3.62 inches 24 x 31 x 92 mm
Weight:	5.29 oz. (150 g)
Notes:

The following products could help or might be needed with this product.

Check the check boxes next to the additional products that you would like to add to the shopping cart, then click on the "Add to Cart" button above. A check box is not shown if a product requires that you select an option or fill out a field. () indicates a required accessory.

Add Professionally Soldered Deans to your device          Price $7.99 Add Professionally Soldered EC3 to your device          Price $8.99 Add Professionally Soldered JST to your device          Price $6.99 Add Professionally Soldered Sermos to your device          Price $8.99 Add Professionally Soldered 3.5mm Bullet to your device          Price $7.99 Add Professionally Soldered 4mm Bullet to your device          Price $7.99 Add Professionally Soldered EC5 to your device          Price $8.99