The Thunder Power Receiver Series Lithium Polymer battery packs offer better value, lower weight, and are ideal for powering your RC radio receiver and servos. Please note that a voltage regulator must be used with this battery when powering servos that have a maximum operating voltage of 4.6V or 6.0V.
Features:
• Increased flight time (roughly twice that of comparable NiMH packs)
• Significantly lighter than NiMH or NiCd packs
• Smaller physical size to easily fit in your RC aircraft, vehicle, or boat
• No memory effect
The Receiver Series LiPo packs from Thunder Power RC are perfect for replacing your old NiMH or NiCd receiver pack. These Lithium Polymer batteries use a state-of-the-art battery chemistry and are considerably lighter and smaller than NiCd or NiMH packs of equal capacity. A charger specifically designed for charging LiPo batteries must be used when recharging.
In addition to better performance, LiPo batteries are also safe and environmentally friendly. Always follow the recommended safety guidelines when charging LiPo batteries.
This Thunder Power receiver battery pack is equipped with a balance connector and wires, as well as a single set of 22-gauge leads equipped with a universal receiver/servo connector. The pack is also equipped with 16AWG wires that can be used for charging at a maximum rate of 14A. This receiver battery is perfect for use in .40 and larger size RC airplanes and .30 to .90 size RC helicopters.
