View Cart
Contains: 0 Item(s)
Search
 
 
 
 
 
 
 
 
 
 
 
 
 

Cap232 BP ARF

Bookmark and Share
SKU: 100005237
MFG: E-flite
Part #: EFL2400
UPC:
The CAP 232 BP 3D combines the sturdy construction of a balsa/light-ply airframe with the uninhibited 3D capability of a lightweight profile park flyer.
Price: $119.99
Electron members log in for full benefits!
Availability: In stock, usually ships within 24 hours
Save to my Wish List Tell a friend
Cap232 BP ARF
Cap232 BP ARF
Cap232 BP ARF
Cap 232 BP ARF

Key Features
  • Ingenious open-structure balsa/light-ply design minimizes weight and maximizes strength
  • Light wing loading and large control surfaces for astonishing freestyle and 3D capability
  • 90% pre-built and covered in UltraCote
  • Carbon fiber pushrods
  • All hardware is included
  • Out-of-the-box compatibility with E-flite outrunner or inrunner brushless motors
  • Outrunner Stick Mount included


  • Overview
    The CAP 232 BP 3D combines the sturdy construction of a balsa/light-ply airframe with the uninhibited 3D capability of a lightweight profile park flyer. It’s all made possible by its intelligently engineered, open structure design that keeps weight to a bare minimum while providing all the structural integrity of a real wood airframe. This feather-light construction, combined with a high-output brushless motor, will provide spine-tingling 3D and freestyle performance that will let you really push the limits. And it comes from the factory 90% built and covered in genuine UltraCote® and UltraCote Lite so you can be up and flying in no time.

    Needed to Complete:
  • 6-channel transmitter (for proper mixing and dual rate capabilities)
  • Micro receiver
  • 4 sub-micro servos
  • Motor
  • 20A Brushless ESC
  • 11x3.8 Slow Flyer Prop
  • Battery & Charger
  • Wing Span: 35.5 in (900mm)
    Overall Length: 35.5 in (900mm)
    Wing Area: 425 sq in (27.5 sq dm)
    Flying Weight: 15.5-17 oz (440-480g)
    Motor Size: Park 450 or Park 400 (needed)
    Radio: 6 channels needed (for proper mixing)
    Servos: 4 sub-micro (needed)
    CG (center of gravity): 4-3/4" (120mm) from the leading edge of the wing
    Prop Size: 11x3.8 Slow Flyer (needed)
    Hardware Included: Yes
    Speed Control: 20A Brushless (needed)
    Recommended Battery: 11.1V 3-cell 910-1320mAh Li-Po
    Scale: Park Flyer
    Approx. Assembly Time: 3-4 hours
    Click on one of the pictures below to view a larger image.
    The following products could help or might be needed with this product.
    Check the check boxes next to the additional products that you would like to add to the shopping cart, then click on the "Add to Cart" button above. A check box is not shown if a product requires that you select an option or fill out a field. () indicates a required accessory.
    HS-55
    Standard Feather

             Price $9.99
    10x4.7 Slow Flyer
             Price $3.99
    Torque 22T/930
             Price $69.99
    36 Amp Thunderbird
             Price $49.99
    Thunderbird 18
             Price $33.96

    Product Reviews

    Average Ratings: No rating

    Write your own review

     

    Rate this product: 1 2 3 4 5 


     
    Secured by SSL