Mon.-Fri. 8:30-6pm EST
Sat. 9-4pm EST
Cularis Glider/Electric Glider Kit
The mechanical retainer system engages automatically when the wings are plugged in at the same time the servos are connected electronically, eliminating the tedious task of connecting the wing-mounted servos.
The all moving tail-plane is also removable with an automatic retainer system
Two carbon wing spars for ample strength
GRP reinforcements in the fuselage and tailplane
Wing mounted servos covered by protective fairings
Polycarbonate fuselage nose reinforcement
All the electronic components have a predefined position in the model.
The Multiplex EasyGlider was the first step for many modelers into the world of model soaring and chasing thermals, now we are pleased to present the Cularis. Minimal cost and minimal effort minimal risk of breakage thanks to the robust ELAPOR Foam construction.
Features Full House operation with ailerons and flaps for full trailing edge camber and reflex, plus CROW capability for accurate landings. Optional electric power set with ample power. Broad performance spectrum with a wide speed range, including aerobatics and thermaling The Cularis can be built as a pure glider or electric power.
Needed to Complete:
Motor: 350-500 watt 36mm Outrunner
Speed Control: 37 amp
Propeller: 12 x 6 (folding)
Battery: 3S 2500mAh LiPo
Servos: (4) HS-55 and 2 HS-82HD
Receiver: Full range 8-Channel 72MHz or 2.4GHz
Write your own review
Rate this product: 1 2 3 4 5