Edge 540 BP ARF E-Flite

Edge 540 BP 3D ARF

Key Features:

Light wing loading for excellent 3D performance

Open structure airframe keeps weight to a minimum

Tapered-thickness airfoil for improved handling

90% factory built and covered in UltraCote® and UltraCote Lite

Factory-drilled control horn mounting holes

Factory-finished wheel pants

Includes outrunner stick mount for use with Park 400 and Park 450 outrunner motors

Includes all hardware

Generously proportioned control surfaces

Overview:
The Edge 540 BP 3D combines the sturdy construction of a balsa/lightweight plywood airframe with the uninhibited 3D capability of a lightweight profile park flyer. It’s all made possible by its intelligently engineered, open structure design that keeps weight to a bare minimum while providing all the structural integrity of a real wooden airframe. This feather-light construction, combined with a high-output brushless motor, will provide spine-tingling 3D and freestyle performance that will let you really push the limits. And it comes from the factory 90% built and covered in genuine UltraCote, so you can be up and flying in no time.

Needed to Complete:

6-channel transmitter (for proper mixing and dual rate capabilities)

Micro receiver

4 sub-micro servos

Motor

20A Brushless ESC

Propeller

Battery & Charger

Note that this product contains the plane only, Flight Equipment is necessary.

Wing Span:	35.5in (900mm)
Overall Length:	36.5 in (930mm)
Wing Area:	410 sq in (26.5 sq dm)
Flying Weight:	15-16 oz (425-455g)
Motor Size:	Park 400 or Park 450
Radio:	6 channels (for proper mixing)
Servos:	4 sub-micro
CG (center of gravity):	4 1/2-inch (114mm)
Prop Size:	11x3.8 slowflyer (park 400) or 12x6 E (Park 450)
Hardware Included:	Yes
Speed Control:	20A Brushless
Recommended Battery:	11.1V 3-cell 910-1320mAh Li-Po
Control Throw (Ailerons):	1" (25mm) with 20% Expo on Low or 2" (50mm) with 40% Expo on High
Control Throw (Elevator):	2" (50mm) with 20% Expo on Low or 2-3/4" (70mm) with 45% Expo on High
Control Throw (Rudder):	3-1/2" (89mm) Left and Right
Scale:	Park Flyer
Approx. Assembly Time:	3-4 Hours

Click for Assembly Manual.

The following products could help or might be needed with this product.

Check the check boxes next to the additional products that you would like to add to the shopping cart, then click on the "Add to Cart" button above. A check box is not shown if a product requires that you select an option or fill out a field. () indicates a required accessory.

HS-55 Standard Feather          Price $9.99 10x4.7 Slow Flyer          Price $3.99 Torque 22T/930          Price $69.99 36 Amp Thunderbird          Price $49.99 Thunderbird 18          Price $33.96