Fun Star 3D .46 ARF
Features:
Balsa and plywood construction
One-piece, pre-covered wing
Clear canopy
Pre-painted fiberglass cowl, must be cut to accomodate engine and muffler
Dark blue cockpit with red pilot bust
Pre-bent 3/16" wire landing gear, with 2.4" rubber treaded wheels and 1" tailwheel
Complete hardware package, including all fasteners and hinges
Aluminum motor mount is pre-installed and non-adjustable
Includes: Decals; complete hardware package including wheels, engine mount, landing gear, pushrods, nuts, and bolts; prebuilt wings, fiberglass cowl, clear canopy, foam rubber, photo-illustrated instructions, and fuel tank.
NOTE: The pictures on the box and in the manual show crossbars in the wing ailerons, however the crossbars are NOT included in the actual kit. The pilot figure shown inside the plane is included.
Required for Completion:
| Engine: |
.40-.46 cu in (6.5-7.5cc) 2-stroke,
or
.48-.53 cu in (7.8-8.7cc) 4-stroke |
| Muffler: |
Stock type supplied with engine |
| Propeller: |
10x6-12x7 |
| Spinner: |
2-1/4" (57mm) |
| Radio: |
4 channel |
| Servos: |
5 standard size and torque |
| Y-Harness: |
One for aileron servos |
| Servo Extensions: |
Two 6" (152mm) for aileron servos,
and two 6"
(152mm) for rudder and elevator servos |
