Habu 32E EDF Jet ARF

Habu 32 DF ARF

• Fully engineered intake and exhaust ducting
• Designed for a direct bolt-in fit for the E-flite Delta-V 32 power system
• Wings and Stabilizers are removable using carbon blade spars and aluminum sockets for easy transport
• Painted fiberglass fuselage and a vertical fin with high quality UltraCote covered wings and stabilizer
• Designed to fit the E-flite 15-25 sized electric retracts
• Fully sheeted wings and stabilizers
• Flap Ready
• Access hatch for the fan unit and a canopy hatch for easy battery access
• Plastic cockpit deck

Overview:
E-flite takes ARF ducted fan performance and engineering to new heights with the Habu 32 DF. Designed around the E-flite Delta-V® 32 80mm fan unit and 2150Kv DF32 brushless motor, its hyper-efficient intake and exhaust ducting allows this potent combo to produce large amounts of thrust when powered with a high-C 6S Li-Po pack. And it does so without resorting to drag-inducing cheater holes. The result is a sport EDF with exhilarating speed that will give even experienced jet jockeys goose bumps.

As the first Platinum Series E-flite® ducted fan, the Habu 32 DF also boasts a level of fit and finish that is every bit as impressive as its performance. Its sleek fiberglass fuselage comes pre-painted and integrates the vertical stabilizer. The fully-sheeted wings and horizontal stabilizers are reinforced with carbon blade spars and covered with genuine UltraCote®. The control surfaces are hinged for you.

Just add the optional E-flite electric retracts (sold separately), and you've got a sport jet that truly stands out from the crowd.

Cliff recommends the following items for completing your Habu 32:
   • 1 Delta-V 32 80mm Fan Unit
   • 1 BL 32 Fan Motor 2150KV
   • 1 JR DS368 Servo
   • 7 JR MC35 Servos
   • 1 Phoenix ICE 100 ESC
   • 1 Castle 10 Amp BEC
   • 1 Set E-flite 15-25 Tricycle Retracts
   • 1 6S 5000 TP 65C Lipo
   • 6 4-inch Servo Extensions
   • 1 18-inch Servo Extension
   • 1 8-inch Servo Extension
   • 3 Y Servo Extensions