J-3 Cub RTF Brushless

J-3 Cub BL RTF Electric

Key Features:

Reusable ZX10 27MHz radio system with 3-wire servos for precise control and fast response

2-cell Li-Po battery included offers a high level of performance and power

DC 2-cell balancing Li-Po charger safely charges and conditions Li-Po battery

370 outrunner brushless power system provides plenty of efficient power

Scale design for a great look right out of the box

Readily available replacement parts keeps your J-3 in the air without a large expense

Ready to fly aerobatic performance right from the box

Overview:
ParkZone’s original J-3 Cub, ParkZone combined the classic lines and gentle flying manners of its legendary namesake to give you a superb park flying experience. Now ParkZone introduces a new and improved J-3 Cub, with brushless motor, Li-Po battery and ZX10 radio system for more power and even better performance. And getting it airborne is still as simple as it gets. Just attach the wing, attach the landing gear, charge the battery and you’re flying.

The brushless motor provides plenty of power with more efficiency and the Li-Po battery offers a higher level of performance and power. Experienced model builders will love the J-3 Cub’s reusable receiver, brushless ESC and 3-wire servos that can be used in other brushless 400 powered park flyers. That includes V-tail and delta wing applications thanks to servo-reversing features of the ZX10 radio system.

The J-3 Cub is a real joy to fly. Carve lazy eights at half throttle. Shoot tabletop touch-and-go’s. Perform simple aerobatics like loops and tail slides.

Perfect for experienced pilots looking for brushless 3-channel fun without a lot of building.

Wing Span:	37 ¼ in (950mm)
Overall Length:	26 ¾ in (680mm)
Flying Weight:	15 oz (425 g)
Motor Size:	370 brushless outrunner
Radio:	ZX10 3-channel proportional
Servos:	Sub-micro 3-wire
Speed Control:	E-flite® 10-amp
Recommended Battery:	7.4V 800mAh Li-Po
Control Throw (Elevator):	Low Rates: .197" (5mm) up/down, High Rates: .275" (7mm) up/down
Control Throw (Rudder):	Low Rates: .275" (7mm) left/right, High Rates: .433" (11mm) left/right
Charger:	12V DC 2-cell Li-Po balancing

Click for Assembly Manual.

Click here to go to the replacement parts listing