Matt Chapman Eagle 580

Matt Chapman Eagle 580 Aerobatic ARF

Features:

• Construction: Balsa and ply with airfoiled control surfaces, motor box preinstalled with blind nuts providing perfect spacing for spinner backplate-no need for measuring, cowl ring also preinstalled.
• Wings: Two piece with carbon fiber wing joiner.
• Covering: Top Flite MonoKote.
• Aileron Control: Dual servo.
• Cowl: Prepainted fiberglass.
• Canopy: Single, one-piece provides access to battery compartment and attaches with magnets.
• Wheel Pants: Prepainted fiberglass.
• Landing Gear: Prepainted fiberglass.
• Decals: Die-cut, Embry-Riddle Eagle 580 color scheme.
• Spinner: Blue plastic spinner included.
• Hardware: Full set included.
• Building Time: Approximately 6-8 hours.
• Warranty: Great Planes Model Manufacturing Company guarantees this kit to be free from defects in both materials and workmanship at date of purchase.

Includes: ElectriFly ARF Matt Chapman Eagle 580 Airplane with fiberglass cowl, wheel pants and landing gear, wheels, hardware and photo-illustrated instruction manual.

Required for Completion:

Radio: 4-channel

Servos: 4-micro

Y Harness: For aileron servos

Motor: 42-50-800 Brushless Out-runner, or equivalent

ESC for Brushless Motor: 45A

Battery: LiPo 2100mAh, 3S-4S

Cell Balancer: For LiPo battery

Battery Charger: LiPo compatible

Propeller: APC 13x8E - 12x6E

Wingspan:	50" (1270mm)
Wing Area:	494 sq in (31.9 sq dm)
Length:	47.75" (1215mm)
Weight:	3.25 - 3.5lb (1470 - 1590g)
Wing Loading:	15 - 16oz/sq ft (46 - 49g/sq dm)
Airfoil:	Fully symmetrical, low wing placement

Click for Assembly Manual.

The wing tube joiner is made of carbon fiber. It aligns the wing automatically and allows for easy transport to and from the field.	This airplane will fly unlimited aerobatics with the RimFire™ .32 motor. The motor box is preinstalled with blind nuts, providing perfect spacing for the spinner backplate without the need for any measuring.	Removing the canopy provides easy access to the battery compartment. Powerful magnets hold the one-piece canopy/hatch securely in place.

Low-profile axles eliminate bulky bolts and give the wheel pants a super-clean look. The self-aligning wheel pants and landing gear are made of lightweight fiberglass.	Durable fiberglass gives the cowl a quality appearance. The cowl ring and magnets are pre-glued and factory-aligned.

Click to see the review on RC Universe.