NexStar Select Brushless EP Trainer RTF

NexSTAR Select Brushless EP Trainer RTF 68.5"

Features:
Construction: Balsa and plywood factory covered in Top Flite MonoKote. CenterCore Molded Composite Main Wing Rib maintains perfect alignment and includes a built-in aileron servo mount. Wing halves are joined with a steel rod. SpinControl Airfoil Extensions provide lift in a stall keeping the wing level. PivotFlex wing mounting system attaches with one nylon bolt. Front hatch with magnetic latch provides easy access to batteries.

Airspeed Restrictor: SpeedBrakes Training Flaps attach to rear section of wing near fuselage and hold airspeed to a minimum to insure smooth landings, removeable as pilot skills increase.

Motor: ElectriFly RimFire 42-50-800 Out-Runner Brushless. Brushless electronic speed control with dual Dean's Ultra Plugs, large heatsink, and 14 guage motor and battery leads. Propeller: Nylon 10x5.

Radio: Factory installed Futaba 6EXA 6-channel computer radio system with trainer system, six model memory, and 3 installed S3003 servos also includes the Futaba PA-2 Pilot Assist Link which returns airplane to level flight due to such factors as wind or overcorrection of controls, just release sticks and the PA-2 automatically returns aircraft to level flight.

6EXA 6-Channel Computer Radio System The perfect flight system to start with and stay with! Trainer System — Lets you link radios with your instructor and share control until you're ready to solo. Microprocessor-controlled — For precise, easy set-up with enhanced versatility. 6-Model Memory — “Remembers” settings for the NexSTAR and up to 5 additional airplanes. 6-Channel Control — Capable of handling advanced airplanes with retractable landing gear and flaps! Built-in PA-2 makes corrections automatically if your plane gets into trouble.

Highlights:

Receiver Battery: 4-Cell, 700mah NiCD square pack (AA size cells).

Landing gear: Duraluminum SnapGear quick landing gear mounts. 2.75" (70mm) diameter nose wheel, 2.75"(70mm) diameter main wheels.

Tail Mounting: EasyAlign System guides parts into place automatically in perfect alignment without tools.

Aileron Control: Single servo control.

Cowl: Painted fiberglass.

RealFlight™ R/C Simulator — NexSTAR EP Edition: Turns your computer into a flying instructor, practice plane and virtual field, all in one! The most advanced, “no-risk” way to learn flight skills.

Building Time: Ready To Fly in approximately 20 minutes.

Warranty Period: Hobbico guarantees this kit free from defects in both material and workmanship at the date of purchase. This warranty does not cover any component part damaged by use or modification.

Requires: Two 9.6V 3600mAh NiMH and Peak Charger.

Wingspan:	68.5" (1740mm)
Wing Area:	722 sq in (46.6sq dm)
Weight:	7-8.5lb (3175-3855g)
Wing Loading:	22-27 oz/sq ft (68-83 g/sq dm)
Length:	56" (1410mm)

Click for Assembly Manual.

Click for Motor Instructions.

SnapGear™ Quick Landing Gear Mounts Installs in 3 seconds and provides the strongest landing gear of any R/C trainer. Locks in place with a snap.	SpinControl™ Airfoil Extensions Proven “wing droops” that provide lift even in a stall to keep the NexSTAR level and you in control.	SpeedBrakes™ Training Flaps Holds airspeed to a minimum, giving you more time to think and react —especially crucial for smooth landings.

Click here to see the NexSTAR EP review on RC Groups.