ParkMaster 3D ARF

ParkMaster 3D

With the ParkMaster 3D you can now fly aerobatics outdoors just like you do indoors! Designed by world renowned R/C pilot and German Indoor Aerobatics Champion, Martin Muller, the ParkMaster is built from the ultra durable ELAPOR® foam making it tough enough for everyday flying.

The PARKMASTER 3D can also be flown outdoors in moderate wind, something you can’t do with your typical indoor “foamy” models”. When equipped with the recommended power system, the ParkMaster 3D will have all the power and control need to fly the most difficult 3D maneuvers.

Features:

Pre-fabricated molded ELAPOR® foam parts

Fully 3-D capable

Ultra Low Wing Loading

Ideal for Honing Your 3D skils

Recommended equipment:
4 HS-65 servos, 2 x ail., 1 x elev., 1 x rudder
1 Servo extension, 6" (15 cm)
1 4-6 Channel receiver, ultra light
1 Torque 22/930 BL outrunner motor (177W)
1 Flight battery, Li-Po 3S-1320mAH
1 Slow Fly Prop, 10x4.7

Wing Span:	39 in.
Wing Area:	450 Sq. In.
Wing Loading:	6.7 oz/sq ft.
Fuselage Length:	40 in.
Motor:	200+ watt 28mm Outrunner (not included)
Propeller:	10x4.7SF (not included)
Battery:	3S-1320 mAh LiPo (not included)
Speed Control:	17 - 27 amp (not included)
Flight Weight:	21 oz.
Flight Characteristics:	3D Aerobatics
Target User:	Advanced-Intermediate