Pluma EP Arf

Pluma 3D Indoor/Outdoor EP ARF 32.5"

Features:

Assembles in about an hour – and excels indoors and out!

Largely prebuilt, with keyed and laser-cut parts that speed the completion of remaining steps.

Performs everything from traditional air show aerobatics to all-out 3D stunts!

With the Pluma, the only thing between you and a full day of aerobatics is a few minutes of easy assembly on the bench. And once you're in the air, you'll discover all of the advantages of exclusive Pro-Formance™ foam construction. Ultra-light and wafer-thin, its power-to-weight ratio puts the entire aerobatic envelope at your command, from stately loops and rolls to hair-raising waterfalls and knife-edge loops.

You can speed the Pluma from box to flight-ready in only an hour! The trim scheme is imprinted and the fuselage is already assembled. All other parts (including the servo pockets) are laser-cut, interlocking and self-aligning. Ailerons and elevators are beveled and prehinged with ultra-light 3M® Blenderm® tape – just like aerobats built for 3D competition. The box fuselage provides the strength for aerobatics and ample room for a wide range of batteries. An easy-access hatch lets you switch packs in a few seconds.

The Pluma can perform brilliantly with the smallest of out-runner motors. But with its generous wing area, you have the lift (and flexibility) to performance-tune with any number of motor-battery combinations. Attractive graphics and impressive, "full-fuse" appearance make the Pluma a standout any way you look at it!

Wingspan:	32.5 in (830 mm)
Wing Area:	518 in² (33.4 dm²)
Weight Range:	8.4-9.5 oz (240-270 g)
Wing Loading:	2.3-2.6 oz/ft² (7.2-8.1 g/dm²)
Length:	38 in (955 mm)
Requires:	4-channel radio w/3 micro servos Out-runner brushless motor 8A brushless ESC (minimum) 11.1V 300mAh LiPo battery

Click for Assembly Manual.