LR-1A Pogo ARF 15e
Key Features:
• Easy-access magnetic hatch
• Painted Pilot head included
• Painted one-piece fiberglass cowl
• Lightweight balsa and plywood construction
• Genuine UltraCote® trim scheme
• Two-piece wing for easy transport
• Requires just three mini servos
• Low parts count for quick assembly
• NMPRA-legal for pylon racing competition
Overview:
Fans of Goodyear racers from the 1950s will love the sleek lines and exhilarating performance of the LR-1A Pogo 15e. Designed by Jerry Small to give intermediate to experienced modelers a sport plane that can also be flown as a pylon racer, the LR-1A Pogo 15e will accept a variety of power setups.
Equipped with E-flite's Power 15 brushless motor, 40A ESC and a 3S Li-Po pack, the Pogo has plenty of performance for sport aerobatics. If or when you want to set it up for pylon racing, the potent combination of E-flite's new Power 25 1250Kv brushless motor, 60A brushless ESC and a high-C 4S Li-Po pack can have you turning laps at speeds in excess of 120 mph!
Whichever setup you choose, sportster or speedster, you can be sure of one thing - the LR-1A Pogo 15e is one hot little number that will leave you grinning from ear to ear however you fly it.
Needed to Complete:
• Transmitter
• Receiver
• Servos
• Batteries
• Motor
• ESC
Click for Assembly Manual.
ATTENTION
The wing panels of your model MUST BE joined together using epoxy.
Please disregard any references in the manual pertaining to the assembly of
the wing without the use of epoxy.
