Pulse XT Mini PNP

Mini Pulse XT PNP

Key Features:

Plug-N-Play® design—just add battery pack, transmitter, receiver and charger

Lightweight balsa/lightweight plywood construction

Covered in genuine Hangar 9® UltraCote®

A 450-size brushless motor at 890Kv that comes factory-installed to provide excellent sport power and save pilots time

22-Amp Brushless ESC installed

Four factory-installed 9-gram sub-micro servos

Factory-installed hinges and control horns

Factory-painted aluminum landing gear and fiberglass wheel pants

Steerable tail wheel

Bolt-on wing and tail

Easy-access magnetic battery hatch

Design based on Hangar 9’s popular Pulse™ 40 XT

Overview:
Based on the popular Hangar 9 Pulse XT 40, the E-flite Mini Pulse XT PNP is perfect for anyone moving up from a trainer or intermediate to expert pilots looking for a no-fuss parkflyer. Its friendly flight characteristics won’t overwhelm the newer pilot, but it’s still agile enough for a wide range of basic aerobatics. And it can be flying in no time because it comes out of the box with the motor, ESC and servos installed. All that needs to be added is the transmitter, receiver, battery pack and charger of choice. Even the control linkages are installed.

Satisfy your flying fix with the E-flite Mini Pulse XT PNP. It has all the features which make for a convenient flight experience. An easy-access magnetic battery hatch stays firmly in place yet makes swapping out batteries quick and easy. The steerable tail wheel is built into the rudder so takeoffs and rollouts on breezy days are more controllable. Two hex screws hold the wing firmly in place making it easy to remove for transport. The bolt-on tail is secured with two heavy-duty lock nuts. The tough aluminum landing gear comes already painted along with a factory-painted fiberglass cowl and wheel pants. This exclusive Plug-N-Play configuration lets you get airborne in less than an hour.

Needed to Complete:
2100mAh 3-cell 11.1V Li-Po
1-3 Cell Li-Po Charger
4+Channel Transmitter
4+Channel Micro Receiver

Wing Span:	42.5 in (1080mm)
Overall Length:	37.5 in (875mm)
Wing Area:	330 sq in (21.5 sq dm)
Flying Weight:	25 - 27 oz (795-965 g)
Motor Size:	Installed 450 BL Outrunner, 890Kv (special PNP motor)
Radio:	4 channels or greater
Servos:	9 gram (4 installed)
CG (center of gravity):	2 3/4 in (70mm) behind the leading edge of the wing
Prop Size:	10x7 Slow Flyer (included) or 10x8 Electric
Spinner Size:	1 3/4 in (included)
Hardware Included:	Yes
Speed Control:	22A Brushless (installed)
Recommended Battery:	2100mAh 11.1V Li-Po
Scale:	Park flyer
Approx. Assembly Time:	1 - 2 hours

Click for Assembly Manual.