View Cart
Contains: 0 Item(s)
Search
 
 
 
 
 
 
 
 
 
 
 
 
 

Razorback Foamy
was 69.99

Bookmark and Share
SKU: 100008634
MFG: Thunder Power
Part #: ISF-Razorback
UPC:
Designed by Mark Leseberg, the Razorback has already proven itself a contest capable plane.
Price: $49.99
Electron members log in for full benefits!
Availability: In stock, usually ships within 24 hours
Save to my Wish List Tell a friend
Razorback Foamy<br>was 69.99
Razorback Foamy
was 69.99
Razorback Foamy<br>was 69.99

Insane Foamies Razorback

Key features:
• Used to take 3rd at the 2007 ETOC
• Depron foam for lightest weight and optimum strength
• Carbon fiber used throughout for truss work and control rods
• Ideal for indoor flight and use outdoors under calm conditions
• Optional vortex generators included to tailor flight characteristics
• Perfect match for Hacker A10 and E-flight Park 180 motors
• Builders kit allowing for custom paint and setups

Overview:
Designed by Mark Leseberg, the Razorback has already proven itself a contest capable plane. The use of 3mm Depron and carbon fiber materials allows for an extremely lightweight and stiff airframe. The unique use of vortex generators allows the user to custom tailor the flight characteristics to his or her tastes.

Proper selection of components and attention to detail easily render a plane of less than 5 ounces weight for super light wing loading and slow flight speeds.

Needed to complete:
• Four channel transmitter is suitable but better radios have certain kinds of mixing which can be helpful...preferably 2.4GHz
• Micro receiver
• 3 sub-micro servos in the 4 to 6 gram weight category
• Brushless motor of at least 50 watts and less than 0.75 ounces in weight
• ESC of 8+ amps
• 2 cell Lipo battery of 350 to 730 mAh
• Suitable propeller
• Lithium capable battery charger
• Foam safe CA glue
• Hinge tape

Note that this product contains the plane only. Flight equipment is necessary.

Wingspan: 30.5"
Length: 36"
Wing area: Approximately 305 in²
Flying weight: 5 to 7 ounces
Motor size: 1/2 to Ύ ounce in the 50 to 75 watt range. The Hacker A10's and E-flight park 250 work well
Recommended battery: 2 cell Lipo, 350 to 730 mAh
ESC: 8 to 10 amp, the TP10-B4 is ideal
Prop size: 7 to 9 inch diameter with 3 to 5 inch's of pitch
Hardware included: Yes
Scale: Indoor 3D
CG: Start 3" back from center of upper wing, move back after test flying
Assembly time: Approximately 8 hours

Product Reviews

Average Ratings: No rating

Write your own review

 

Rate this product: 1 2 3 4 5 


 
Secured by SSL