SPAD XIII WWI Par

SPAD XIII WW1 Park Flyer Airplane

German Fokkers held air superiority until 1917. But when the SPAD XIII appeared — with America’s top WWI ace at the stick — their fortunes quickly turned. Vintage air combat meets park flyer convenience in the compact, almost ready-to-fly ElectriFly SPAD XIII.

Features:

Construction: Laser cut balsa and plywood

Wings: One piece each bi-wing configuration with painted cabanes and interplane struts

Covering: Factory applied Top Flite MonoKote

Battery Compartment:

Cowling: Vacuum formed plastic, radiator design with plywood frame

Landing Gear: Pre-bent and factory painted

Wheels: Two 3" (76mm) diameter lightweight foam tires on wheels

Aileron Control: Dual servo on top wing

Pilot Bust: Painted

Hardware: Complete package designed for light weight and precise control response

Building Time: Ready to fly in 6-8 hours

Warranty: Great Planes Model Manufacturing Company guarantees this kit free from defects in both materials and workmanship at the date of purchase.

Includes: Spad III Park Flyer Sport Scale Airplane with pre-bent landing gear, scale wheels, wing struts, wood servo trays, pilot bust, hardware package, photo-illustrated instructions, decals, vacuum formed radial engine cowl, two replica Vickers .303 caliber guns

Requires:

Motor: ElectriFly RimFire 28-30-950 Brushless, or equivalent

Propeller: 10x3.5

Prop Adapter: 3mm

Speed Control: 25 Amp

Motor to Speed Control Connector

Radio: 4-Channel

Servos: 4-Micro (2-ailerons, 1-rudder, 1-elevator)

Y-Harness: One for aileron servos

Battery: LiPo 1250mAh 11.1V 15C discharge w/balance

Battery Charger: LiPo compatible

Misc. Items: Building and Field Equipment

Wingspan:	34" (865mm)
Wing Area:	390 sq in (25.2 sq dm)
Weight:	22.4 - 25.2oz (635 - 715g)
Wing Loading:	8.3 - 9.3 oz sq ft (25 - 28 g/sq dm)
Length:	27" (685mm)

Click for Assembly Manual.

An out-runner brushless motor gives the SPAD XIII a great power-to-weight ratio and long flight times. It performs well with the ElectriFly RimFire™ 28-30-950 brushless motor	It's easy to build and fly this WWI fighter bipe. The SPAD XIII's camouflage covering comes expertly applied, and the ingenious system of cabanes automatically aligns the top and bottom wings perfectly.	In action, the SPAD XIII was admired for its ruggedness, speed, firepower and diving ability. You'll find plenty to admire in the ElectriFly sport-scale model, too — including the realism offered by easy-to-install vacuum-formed parts.

Other supplied details include a pilot figure and machine guns, representing the two Vickers .303-cal. guns that made the original SPAD XIII one of the best dogfighters of WWI.	The SPAD XIII is perfectly suited for flying at your local field or in a nearby park. With its ability to turn sharply and change directions quickly, any open area can easily become the stage for exciting sport flying and mock combat.	One of the Allies greatest contributions to WWI aviation history comes alive in the ElectriFly SPAD XIII — a quick-building ARF that joins traditional wood construction quality with the convenience and performance of brushless motor power.

Built-up wood structures are covered in a high-quality film with factory-applied decals. Vacuum-formed details, pilot figure, and complete hardware are included — for impressive performance and sport-scale looks with easy 6-8 hour assembly.	The hardware supplied with the SPAD XIII has been designed specifically for light weight and precise control response.	Even among the ElectriFly brand of highly regarded all-wood WWI ARF electrics, the SPAD XIII stands out — with many refinements for the easiest assembly and colorful, “all-American” sport-scale looks.