Sequence F3S 50 EP ARF

Sequence™ F3A 50” EP ARF

Overview:
The Sequence is ElectriFly’s first pattern ship, and it offers all three characteristics that define the perfect pattern ship: crisp response, smooth handling, and straight-as-an-arrow tracking.

It is sure to impress at the field and in the air! The quality construction and high-performance features are the same as those found on expensive custom models, but the Sequence is much more affordable. This newest member of the E-Performance XLC Series is a spirited performer that even the most discriminating pilot will appreciate.

Features:

Exceptionally strong and ultra-light balsa airframe is prebuilt and factory-covered.

Carbon fiber and painted fiberglass parts reduce both weight and assembly time, which takes just 4 – 6 hours.

The spectacular 6-color MonoKote® trim scheme shows an international flair and enhances the Sequence’s precision maneuvers.

The motor box is prebuilt, so there is no measuring or cutting.

Cowl ring and magnets are factory-aligned and installed for ease and clean looks.

Airfoiled tail surfaces, which are common on custom-built pattern ships, improve tracking and handling precision.

Ailerons are factory-hinged for added convenience.

Self-aligning wheel pants.

Canopy/battery hatch attaches with factory-installed magnets for effortless battery changes.

Requires:

4-channel radio with 4 micro servos

800kV outrunner brushless motor

45A ESC

14.8V 2100mAh LiPo battery

12 x 6e propeller

Wingspan:	50 in (1270 mm)
Wing Area:	505 sq in (32.6 sq dm)
Wing Loading:	16-17 oz/sq ft (49-52 g/sq dm)
Weight:	3.5-3.75 lb (1590-1700 g)
Length:	51.5 in (1310 mm)

Click for Assembly Manual.

The Sequence’s design features and brilliant 6-color MonoKote trim scheme show an international flair, but the construction and assembly ease are all ElectriFly XLC. Bold graphics on the wing bottom make it easy to orient the Sequence at a glance.	The motor box is prebuilt. No measuring or cutting required; drive in four screws and you're done. The cowl ring and magnets are factory-aligned and installed for ease and clean, uncluttered looks.	The canopy/battery hatch attaches with factory-installed magnets. It lifts off easily, for effortless battery changes.

Airfoiled tail surfaces improve both tracking and handling precision. They're common on custom-built pattern ships and a performance plus built into the Sequence's design. Ailerons are factory-hinged for your convenience.	Assembly takes just 4-6 hours from start to finish. A prebuilt and factory-covered balsa airframe, carbon fiber and painted fiberglass parts reduce work and weight simultaneously. Other assembly aids include a prebuilt motor box and self-aligning wheel pants.