VoltWatch2 4.8/6v Rx Battery Monitor

VoltWatch2 on-board Receiver Battery Monitor for 4.8V and 6V NiCd and NiMH receiver packs.

This monitor mounts on the outside of the airplane, so you can see at a glance the status of the receiver battery mounted inside.

Features:

7-LEDs provide instant, accurate battery voltage status of Low, Safe, or Max. Only one LED glows at a time.

Small switch to select 4.8V or 6V battery

Very lightweight, only .15oz (4.3g) unit can mount on the side of the fuselage, or under the plane's canopy.

Draws amazingly low current - from 4-34mA depending on the battery voltage.

Plugs into any open receiver channel using a Futaba J connector.

One year warranty.

Includes:
- One VoltWatch2 On-Board Receiver Battery Monitor w/Futaba J plug
- One 1.5"x1" piece of double sided mounting tape

Requires:
- Plugging into any unused receiver port
- Mounting onto the airplane with double-sided tape

Important: This has a Futaba J connector pre-installed. For radios other than Futaba, you will have to change or modify the plug.

Length:	1.65" (42mm)
Width:	.63" (16mm)
Height:	.16" (4mm)
Weight:	.15oz (4.3 grams)
Current Draw:	approx 4-34mA
Lead Length:	198mm (7.79")