Mon.-Fri. 8:30-6pm EST
Sat. 9-4pm EST
Interface Cable for the GoPro Hero 3 Camera and Fat Shark FPV Goggles.
This is an interface cable (one single cable) that will connect between the GoPro Hero 3 and Fat Shark FPV Goggles making FPV easy. No soldering and no worrying which cable to use to get it done right. This cable is only to be used with Fat Shark goggles and no other 5.8 system.
Yes this is the cable you need if you want to easily connect your Fat Shark FPV headsets to your Go Pro Hero 3 Camera. Go Pro3 10-Pin USB AV Out Connector with 5 volt input which is what is coming out of the fat Shark Transmitters. This is a single cable.
Write your own review
Rate this product: 1 2 3 4 5
Jake on 2/2/2014 8:08:53 AM
Descriptive text: Awesome, works perfectly on dji phantom v1
Dawn Ingraldi (Verified Purchase) on 1/16/2014 6:06:31 PM
Descriptive text: I got this cable to run from my GoPro 3 Black Edition to the transmitter on my Fatshark, it works great and is just the right length.
"Good Idea - Poor Construction"
Dale Honning (Verified Purchase) on 11/13/2013 8:35:19 AM
Descriptive text: This is the correct wiring for interface between FatShark & GoPro and it works great. The weak link is on the GoPro end. The flex between the cable & the camera cause the wires to come loose. I tried giving it a little extra support with a dab of silicone prior to use but still had a problem. It is also too expensive for what you get. This should top out at $20 max! Its is priced at $50. Come on.