HS-81 Standard Micro Analog Servo
Availability:
In stock available to ship within 24 hours.
You will earn 8 Electron Reward Points on this product!
Click to find out more about our points program and save big!
Click to find out more about our points program and save big!
Low Price Promise!
Click to find out more about our low price promise
Click to find out more about our low price promise
HS-81 Standard Micro Analog Servo
Note that these are not metal gear servos but the standard resin gear versions.
The HS-81'S are among Hitec’s most popular servos. With a fine balance between speed and torque, the HS-81’s were designed to be both economical and reliable.
Hitec Servo Specification Chart.
Dimensions: | 1.17" x 0.47"x 1.16" (29.8 x 112 x 29.6mm) |
Weight: | 0.58oz (16.6g) |
Operating Speed (4.8V): | 0.11sec/60 degrees at no load |
Operating Speed (6.0V): | 0.09sec/60 degrees at no load |
Stall Torque (4.8V): | 36.10 oz/in. (2.6kg.cm) |
Stall Torque (6.0V): | 41.66 oz/in. (3kg.cm) |
Operating Voltage: | 4.8-6.0 Volts |
Bearing Type: | None, outer case serves as bearing |
Gear Type: | All Nylon |
Motor Type: | 3 Pole Ferrite |
Potentiometer Drive: | Direct Drive |
Control System: | +Pulse Width Control 1500usec Neutral |
Required Pulse: | 3-5 Volt Peak to Peak Square Wave |
Operating Temperature Range: | -20 to +60 Degree C |
Operating Angle: | 40 Deg. one side pulse traveling 400usec |
360 Modifiable: | No |
Direction: | Clockwise/Pulse Traveling 1500 to 1900usec |
Current Drain (4.8V): | 8.8mA/idle and 220mA no load operating |
Current Drain (6.0V): | 9.1mA/idle and 280mA no load operating |
Dead Band Width: | 8usec |
Connector Wire Length: | 6.29" (160mm) |