Castle Link Quick Connect (010-0079-00)
$17.99
Skip to product information
Castle Link Quick Connect (010-0079-00)
$17.99
Seamless Tuning
Direct connection without receiver disconnect
Auto Switch
Detects Castle Link programmer automatically
Universal Plug
Compatible with standard receiver leads
Effortless ESC Tuning AccessSimplify your Castle Creations programming setup
The Castle Link Quick Connect eliminates the hassle of unplugging your electronic speed controller (ESC) from the receiver whenever you need to adjust parameters. Designed specifically for RC cars, planes, and boats utilizing Castle ESCs, this adapter seamlessly reroutes the signal wire to your Castle Link programming adapter. Keep your clean wire management intact while enjoying quick, instant access to complete brushless motor and ESC programming.
Streamlined RC Signal ManagementNever disrupt your receiver wiring again
Experienced RC modelers spend considerable time securing throttle and servo leads for safe driving or flying. Unplugging a Castle ESC controller from the receiver disrupts this neat installation and can cause unnecessary wear on standard receiver channel pins. Traditional Y-harnesses fail because the signal line remains connected to the receiver during tuning; however, the Castle Link Quick Connect automatically detects the presence of a Castle Link adapter on its free lead and safely disconnects the signal line from the receiver. Included in the package is a protective piece of heat shrink tubing to permanently lock the connection between your ESC lead and the Quick Connect, guaranteeing maximum signal reliability for all your RC vehicle maintenance and tuning needs.
Technical SpecificationsDetailed dimensions and connector specifications
Compatible Vehicles
Castle Creations ESC Equipped RC Cars, Boats, & Planes
Part Type
ESC Signal Switcher / Programming Harness
Material
Copper Wire & Flexible PVC
Placement/Position
Between ESC and Receiver
Weight
0.25 oz / 5.4g
Wire Length to RX
4 in / 13 cm
Wire Length to Castle Link
12 in / 35 cm
Connector Type
Universal
Key System FeaturesSmart engineering for clean wiring
Automatic Signal SwitchingAutomatically disconnects RX signal line when Castle Link is detected
Clean Wire ManagementKeeps receiver harness permanently tied down during ESC tuning
Universal ConnectorsConnects directly into standard radio receiver throttle channels
Protective Heat ShrinkIncludes heat shrink tubing to permanently secure the ESC lead
Extended Reach LeadFeatures a 12-inch Castle Link cable for easy access in tight chassis
Ultralight ConstructionWeighs only 0.25 oz to minimize added vehicle weight
Frequently Asked QuestionsEverything you need to know
Why do I need the Castle Link Quick Connect for my RC vehicle?
The Castle Link Quick Connect allows you to plug in your Castle Link programmer without having to unplug your ESC wire from the receiver, preserving your clean wire management.
Can I use a standard Y-harness instead of the Castle Link Quick Connect?
No, a standard Y-harness leaves the signal line connected to the receiver, which interferes with data transfer. The Castle Link Quick Connect automatically isolates the signal line from the receiver when the programmer is detected.
How do I install the Castle Link Quick Connect in my model?
Connect the main lead from your ESC into the Castle Link Quick Connect, secure it with the included heat shrink tubing, plug the 4-inch lead into your receiver throttle channel, and leave the 12-inch lead accessible for your programmer.
Customers Also Bought
No related products found.