Pacer Epoxy Finishing Resin 4oz (PAAPT41)
$14.99
Skip to product information
Pacer Epoxy Finishing Resin 4oz (PAAPT41)
$14.99
Low Odor
Easy to work indoors
Easy Sanding
Sands smooth with ease
Working Time
20 to 30 minutes
Full Cure
Hard in 6 to 8 hours
Clear Formula
Tough non brittle finish
Fuel Resistant
Seals hulls and engine areas
Premium Surface ProtectionPerfect for Fiberglassing and Sealing Models
The Z-Poxy Finishing Resin, 4 oz. is a high-grade, lightweight two-part epoxy laminating formula designed specifically for RC airplane wings, model boat hulls, and custom craft projects. This high-performance epoxy resin penetrates deep into porous woods, creating a fuel-resistant barrier that will not yellow or become brittle over time. Ideal for serious model builders, Z-Poxy Finishing Resin ensures a smooth, durable finish that sands effortlessly for flawless paint prep.
Master-Grade Epoxy Finishing ResinSuperior Strength and Seamless Application
Achieve professional-grade finishing results on your RC vehicles and scale models with Z-Poxy Finishing Resin, 4 oz.. Engineered with an easy 1:1 mix ratio by volume, this thin-formula finishing resin is optimized for fiberglass laminating on aircraft wings and sealing wood against nitromethane fuel or water damage. With a generous 20 to 30-minute working time, it allows modelers to properly position glass cloth or soak into grain, curing hard in just 3 to 4 hours and fully setting within 6 to 8 hours. Whether you are prepping an RC boat hull or sheeting foam wing panels, Z-Poxy Finishing Resin delivers an ultra-tough, clear, and non-brittle bond that sands to a satin-smooth surface ready for final painting.
Technical SpecificationsDetails and Mixing Properties
Compatible Vehicles
RC Airplanes, RC Boats, & Scale Models
Part Type
Epoxy Finishing Resin
Material
Two-Part Epoxy Laminate
Volume
4 oz. / 118 ml
Working Time
20 to 30 minutes
Hardness Time
3 to 4 hours
Full Cure Time
6 to 8 hours
Mix Ratio
1:1 by volume
Key Features & BenefitsBuilt for Precision Model Builders
Low Odor FormulaSafe and pleasant for indoor workshop use
Clear FinishCures clear without becoming brittle with age
Sandable SurfaceSands easily to a perfectly smooth prep finish
Fuel ResistantSeals engine and fuel tank compartments securely
Versatile ApplicationIdeal for laminating fiberglass and sealing wood hulls
Convenient MixingSimple 1:1 mix ratio by volume
Frequently Asked QuestionsEverything you need to know
How do I mix Z-Poxy Finishing Resin, 4 oz.?
Z-Poxy Finishing Resin, 4 oz. mixes easily in a 1:1 ratio by volume. Combine equal parts of part A and part B in a clean plastic container and stir thoroughly before applying.
Can Z-Poxy Finishing Resin, 4 oz. be thinned down?
Yes, Z-Poxy Finishing Resin, 4 oz. can be thinned in small ratios using isopropyl alcohol or methanol if lower viscosity is needed, though excessive thinning may alter cure times and properties.
What is the working and cure time for Z-Poxy Finishing Resin, 4 oz.?
Z-Poxy Finishing Resin, 4 oz. offers a 20 to 30-minute working time, becomes hard in 3 to 4 hours, and reaches full cure in 6 to 8 hours.
How do I clean up uncured Z-Poxy Finishing Resin, 4 oz.?
Uncured or unmixed Z-Poxy Finishing Resin, 4 oz. can be easily cleaned up using isopropyl alcohol or methanol.
Customers Also Bought
No related products found.