Du-Bro Micro Pushrod Guide (4) (DUB923)
$2.25
Skip to product information
In Stock
Du-Bro Micro Pushrod Guide (4) (DUB923)
$2.25
In Stock
Arrives
Free shipping on orders $99+.
Pick up today in Cumming, usually ready in 2 hours.
Tri-Hole Design
Accommodates Custom Linkage Setups Easily
0.080 Guide Holes
Fits Standard Small Pushrod Wires
Foam & Balsa
Universal Mount For RC Models
Precision Linkage SupportSmooth Pushrod Control For Models
Keep your control linkages running smoothly with the Micro Pushrod Guides. Designed for ultimate versatility and quick installation, these supports eliminate pushrod flexing and binding in custom model airframes. Ensure maximum control authority and throttle precision for your favorite RC plane model.
Master Custom LinkagesReliable Control Wire Support Systems
The Micro Pushrod Guides provide critical stability for micro control linkages, throttle connections, and pushrod wires on custom built models. Designed with a versatile three-hole pattern, each guide accommodates various linkage geometries for custom airframe builds. Installation is fast and simple: for foam airframes, push mounting pins through and glue with CA glue or epoxy; for balsa wood builds, pre-drill small pilot holes and glue into place. Featuring precision 0.080 inch diameter guide holes, these RC airplane hardware supports prevent wire flexing under load to keep your controls crisp and responsive.
Technical SpecificationsHardware Dimensions And Fitment Details
Compatible Vehicles
Universal RC Airplanes
Part Type
Pushrod Support / Linkage Guide (hardware)
Material
Molded Composite
Placement/Position
Airframe Fuselage / Servo Linkages
Hole Diameter
0.080 in / 2.03 mm
Mounting Style
CA / Epoxy Cement Mount
Key Performance FeaturesEngineered For Simple Precision Setups
Tri-Hole ConfigurationSupports multiple pushrod wire setup configurations
0.080 Inch Hole DiameterSized accurately for standard micro control wires
Multi-Material MountingSuitable for balsa wood, foam, and composite airframes
Simple Glue-In SetupSecure easily using standard CA glue or structural epoxy
Flex PreventionEliminates linkage wire slop and bending under load
Frequently Asked QuestionsEverything you need to know
What are Micro Pushrod Guides used for in RC modeling?
Micro Pushrod Guides are used to support long pushrods, throttle linkages, and control wires in RC aircraft to prevent bending, flexing, and binding during flight control movements.
What wire size fits through the Micro Pushrod Guides?
The Micro Pushrod Guides feature guide holes with a 0.080-inch (2.03 mm) inner diameter, making them compatible with standard micro pushrod wires.
How do I install Micro Pushrod Guides on a foam or balsa airframe?
For foam aircraft, push mounting pins through the guide into the foam, secure with CA glue or epoxy, and trim any excess pin length. For balsa wood models, pre-drill small pilot holes before setting the guide in place with adhesive.
Customers Also Bought
No related products found.