OSMW Sky Ranger 40 Kit

Sky Ranger 40 Laser-Cut R/C Kit

Overview:
The Sky Ranger 40 is as much fun to build as it is to fly. Using updated design techniques and laser-cut precision, we’ve designed this kit so most any modeler can successfully assemble it in a short amount of time.

This all-around sport model’s retro design looks great in the air and makes you look like an ace pilot. Loop it, roll it, spin it, snap it, and just have a great time flying it. Power the Sky Ranger 40 with either an electric or glow powerplant.

We’ve designed the fuselage with a built-in hatch so you have quick access to either your LiPo batteries or fuel tank.

• A Great Sportster
  Whether you like gentle cruising, or prefer to tear up the sky, the Sky Ranger 40's wide flight envelope makes it a blast to fly!

• WEB-LOCK Construction
  There's nothing else like it. Build our wings, straight and true - with a minimum amount of fuss.

• Premium USA Hardware
  Included in each Old School Model Works kit is a premium hardware package. We only source our hardware from brand-name, USA manufacturers to guarantee the best quality.

• Rugged 3/16" Main Gear
  We include sturdy, pre-bent main gear and wheel collars. The 3/16" diameter wire can absorb quite a bit of abuse for those no-so-good landings.

• Front hatch
  Held in place with magnets, this hatch gives you easy access to batteries or fuel.

• Windscreen
  Also included is a clear, pre-formed plastic windscreen.

Required Radio:
4 channel system(2) 40-70 in./oz. servos for elevator and rudder;(2) 40-70 in./oz. servos for ailerons;(1) 40-70 in./oz. servo for throttle (if using a glow engine)

Required Power:
Electric (minimum 800 watt motor, 80 amp ESC, 4-5S LiPo)
Glow (.40-.45 engine, 6 ounce tank, fuel tubing)

Additional items needed to complete the Sky Ranger 40 kit:
   • 4 channel radio and servos
   • Propeller
   • Engine/Motor mount & mounting hardware
   • "Y” servo harness (for ailerons)
   • Pushrods (two 5” for ailerons, two 24” for elevator & rudder, one 12” for throttle if glow powered)
   • Clevises for the pushrods (8 if electric, 10 if glow)
   • Two 3” diameter main wheels
   • 1 - tailwheel
   • Covering