OSMW Sky Ranger 40 Kit
Click to find out more about our points program and save big!
Click to find out more about our low price promise
Sky Ranger 40 Laser-Cut R/C Kit
The Sky Ranger 40 is as much fun to build as it is to fly. Using updated design techniques and laser-cut precision, we’ve designed this kit so most any modeler can successfully assemble it in a short amount of time.
This all-around sport model’s retro design looks great in the air and makes you look like an ace pilot. Loop it, roll it, spin it, snap it, and just have a great time flying it. Power the Sky Ranger 40 with either an electric or glow powerplant.
We’ve designed the fuselage with a built-in hatch so you have quick access to either your LiPo batteries or fuel tank.
A Great Sportster
Whether you like gentle cruising, or prefer to tear up the sky, the Sky Ranger 40's wide flight envelope makes it a blast to fly!
There's nothing else like it. Build our wings, straight and true - with a minimum amount of fuss.
Premium USA Hardware
Included in each Old School Model Works kit is a premium hardware package. We only source our hardware from brand-name, USA manufacturers to guarantee the best quality.
Rugged 3/16" Main Gear
We include sturdy, pre-bent main gear and wheel collars. The 3/16" diameter wire can absorb quite a bit of abuse for those no-so-good landings.
Held in place with magnets, this hatch gives you easy access to batteries or fuel.
Also included is a clear, pre-formed plastic windscreen.
4 channel system(2) 40-70 in./oz. servos for elevator and rudder;(2) 40-70 in./oz. servos for ailerons;(1) 40-70 in./oz. servo for throttle (if using a glow engine)
Electric (minimum 800 watt motor, 80 amp ESC, 4-5S LiPo)
Glow (.40-.45 engine, 6 ounce tank, fuel tubing)
Additional items needed to complete the Sky Ranger 40 kit:
• 4 channel radio and servos
• Engine/Motor mount & mounting hardware
• "Y” servo harness (for ailerons)
• Pushrods (two 5” for ailerons, two 24” for elevator & rudder, one 12” for throttle if glow powered)
• Clevises for the pushrods (8 if electric, 10 if glow)
• Two 3” diameter main wheels
• 1 - tailwheel