80Amp Pro SwitchMode BEC Brushless ESC, EC5 (V2)
80Amp Pro SwitchMode BEC Brushless ESC, EC5 (V2)
80-Amp Pro Switch-Mode BEC Brushless ESC, EC5
Key Features:- 3–6S Li-Po, 9- to 18-cell Ni-Cd/Ni-MH input voltage
- 5-volt Switch-Mode BEC circuit capable of 2.5-amp continuous current on any recommended input voltage
- Drives up to 7 analog or 6 digital standard-sized servos, with the BEC on any recommended input voltage
- Up to 80-amp continuous current with proper air flow, 100-amp peak
Overview:
When performance matters in your high-current applications look no further than the E-flite® 80-Amp Pro Switch Mode ESC. This is a high-quality, efficient sensorless brushless electronic speed control with an integrated Switch-Mode BEC. It can operate without the need for a separate receiver battery to power your servos and receivers, saving you weight and complication.
It is capable of up to 80 amps continuous current when using 3- to 6-series Li-Po battery packs. You can drive up to 7 analog or 6 digital standard-sized servos with the BEC on any recommended input voltage.
Featuring an exposed, finned heat sink aluminum case with lightweight plastic endcaps, safe power-arming along with advanced programmable features such as low voltage cutoff, braking, timing, throttle input range, and more, the E-flite 80-Amp Pro Switch Mode ESC is truly a ‘pro series’ electronic speed control.
This product is not intended for use by children under 14 years of age without direct adult supervision.
Forward: | Yes |
Brake: | Yes |
Time Delay Brake: | Yes |
Continuous Maximum Current: | 80A |
Input Connector Types: | EC5, 10AWG |
Output Connector Types: | 4mm Gold Bullet, 12AWG |
Momentary Peak Current: | 100A |
Length: | 3.0 in (77mm) |
Width: | 1.6 in (41mm) |
Height: | 0.62 in (15.5mm) |
Weight: | 3.75 oz (106g) |
BEC Voltage: | 5.5V Switch-mode |
Overload Protection: | Yes |
Cells w/BEC: | 9-18 cells NiMH, 3-6S LiPo |
Auto Cutoff: | Yes |
- Choosing a selection results in a full page refresh.
- Opens in a new window.