HS-85BB Micro Analog
HS-85BB Micro Analog
Regular price
$23.99
Regular price
$0.00
Sale price
$23.99
Unit price
per
Shipping calculated at checkout.
Couldn't load pickup availability
Availability:
Sorry we are out of stock but have more on the way.
You will earn 11 Electron Reward Points on this product!
Click to find out more about our points program and save big!
Low Price Promise!
Click to find out more about our low price promise
HS-85BB Micro Analog Servo
Overview:
The HS-85BB features a high power motor for greater speed and torque. Available in both resin and metal gear versions, the HS-85BB is the choice of modelers looking for a high performance servo without breaking the bank. The ball bearing supported output shaft and sturdy gear trains are great for unlimited sailplanes flaps and ailerons.
Hitec Servo Specification Chart.
| Dimensions: | 1.14" x 0.51"x 1.18" (29 x 13 x 30mm) |
| Weight: | 0.77oz (21.9g) |
| Operating Speed (4.8V): | 0.16sec/60 degrees at no load |
| Operating Speed (6.0V): | 0.14sec/60 degrees at no load |
| Stall Torque (4.8V): | 41.66 oz/in. (3kg.cm) |
| Stall Torque (6.0V): | 48.6 oz/in. (3.5kg.cm) |
| Current Drain (4.8V): | 8mA/idle and 240mA no load operating |
| Current Drain (6.0V): | 8.6mA/idle and 260mA no load operating |
| Bearing Type: | Single Ball Bearing |
| Gear Type: | All Nylon Gears |
| Motor Type: | 3 Pole Ferrite |
| Potentiometer Drive: | Direct Drive |
| Control System: | +Pulse Width Control 1500usec Neutral |
| Required Pulse: | 3-5 Volt Peak to Peak Square Wave |
| Operating Voltage: | 4.8-6.0 Volts |
| Operating Temperature Range: | -20 to +60 Degree C |
| Operating Angle: | 40 Deg. one side pulse traveling 400usec |
| 360 Modifiable: | Yes |
| Direction: | Clockwise/Pulse Traveling 1500 to 1900usec |
| Dead Band Width: | 8usec |
| Connector Wire Length: | 6.29" (160mm) |
- Choosing a selection results in a full page refresh.
- Opens in a new window.