Mercury Adhesives 4 Pc Starter Pack with Activator/accelerator
Click to find out more about our points program and save big!
Click to find out more about our price match guarantee!
Mercury Adhesives 4-Piece Starter Pack with Activator/Accelerator
The 4-piece Mercury Adhesives Starter Pack contains the three most often used CA adhesives for almost all modelers, and a bottle of spray adhesive activator.
- 2 oz M20FT Thin CA
- 2 oz M300FM Med CA
- 2 oz M1100G Thick CA
- 2 oz MH16 Accelerator
M20FT Thin FLEX is a very low viscosity cyanoacrylate and was developed for demanding high speed wicking applications. Excellent adhesion and cure speed on difficult to bond plastics and rubbers and contaminated or acidic surfaces.
M300M Instant is a medium viscosity cyanoacrylate developed for demanding high speed wicking applications. Excellent adhesion and cure speed on difficult to bond plastics and rubbers and contaminated or acidic surfaces.
M1100G Instant is a thick gap filling viscosity that bonds to a wide variety of materials including wood, paper, cardboard, leather, fabrics, etc. Bond times vary according to the substrates being bonded but are generally faster than normal super glues.
MH16 Spray Accelerator speeds up the curing time of CA adhesives. No more waiting for the adhesive to cure. It cures CA glue in seconds.
Mercury Adhesives - A Complete Line of CA Products The founders of Mercury Adhesives recognize that quality is of the utmost importance when it comes to deciding which CA you'll choose for building, improving or repairing your models. Mercury is proud that their adhesives and processes are accredited ISO9001-2000 and QS9000. These standards and level of quality allow all Mercury products to carry an unconditional 2 year warranty.
It's not just a better CA! - It's a better bottle! Mercury Adhesive's exclusive "Pin in Cap" bottle top screws on and off instead of the usual push-pull. This assures a smooth never clog operation and a tight seal preserving freshness.
How many times have you been frustrated, fed up or just plain mad that the stem on your glue bottle is clogged or that you have to take a pair of pliers to get the top off only to find the glue inside has already hardened up?
The bottle top Mercury has designed is clever and actually screws on and off instead of the usual push on and pull off. This assures a smooth operation and a good tight seal keeping the adhesive fresh, and helping prevent spills. The Mercury bottle cap is also scientifically engineered in such a way to help prevent clogging.
This remarkable cap is actually two caps in one to preserve freshness and is designed with a pin built right into the top of the cap. This pin gets inserted into the bottle's tip when the cap is screwed down. No more clogged tips!