Pine Car Weight 2oz. Tungsten Incremental Plate
$20.99
Skip to product information
Only 1 Left!
Pine Car Weight 2oz. Tungsten Incremental Plate
$20.99
Ultra High Density
1.7 Times Denser Than Lead
Precision Tuning
Fine Adjustments In 1/16oz Increments
Complete Hardware
Includes Screws And Spacers
In Stock
Maximum Performance EdgeOptimize Center Of Gravity Effortlessly
Take complete control of your race car balance with the Precision Tungsten Incremental Weight Kit. Engineered with high-density tungsten that is 1.7 times denser than lead, this weight set allows precise center-of-gravity tuning in compact chassis cavities. It is the ultimate accessory for race car builders aiming to reach maximum allowable scale weight with maximum aerodynamic efficiency.
Precision Mass AllocationCompact Mass For High Speed Tuning
The Precision Tungsten Incremental Weight Kit provides hobbyists and pinewood model builders with an unmatched performance-tuning solution. Because tungsten material is significantly denser than lead, you can concentrate heavier mass into smaller, precise areas of your chassis to dramatically improve handling and momentum. The incremental configuration features fine 1/16 oz (1.77 g) units along with heavier 1/2 oz (14.1 g) and 3/16 oz (5.31 g) segments to achieve exact total weight targets. Included mounting screws and spacers allow for straightforward installation directly into car cavities or countersunk underside mounts.
Technical SpecificationsDetailed Weight Breakdown And Hardware
Part Type
Tuning Chassis Weight Kit
Material
Ultra-Dense Tungsten
Density Advantage
1.7x Denser than Lead
Incremental Precision
1/16 oz / 1.77 g
Placement/Position
Chassis Cavity / Underside Countersunk (map-pin)
Base Weights Included
3x 1/2 oz / 14.1 g
Mid Weights Included
2x 3/16 oz / 5.31 g
Fine Weights Included
2x 1/16 oz / 1.77 g
Hardware Included
4 Screws, 3 Spacers
Key Hardware FeaturesEverything Needed For Precision Balance
High-Density Material1.7x denser than standard lead weights for tight area placement
Modular IncrementsFine-tune overall weight in precise 1/16 oz (1.77 g) steps (sliders)
Compact FootprintConcentrates mass low in chassis cavities to optimize center of gravity
Complete Hardware PackComes with 4 screws and 3 spacers for immediate installation
Core Weight DistributionIncludes three 1/2 oz weights to establish maximum main mass
Fine Balance AdjustmentIncludes two 3/16 oz and two 1/16 oz weights for exact limit adjustments
Frequently Asked QuestionsEverything you need to know
Why should I choose the Precision Tungsten Incremental Weight Kit over traditional lead weights?
Tungsten is 1.7 times denser than lead, allowing the Precision Tungsten Incremental Weight Kit to fit far more weight into a much smaller chassis cavity. This gives you superior control over your vehicle's center of gravity and aerodynamics.
How do I install the Precision Tungsten Incremental Weight Kit onto my car?
You can place the weights directly into a routed chassis cavity and secure them using the included mounting screws and spacers, or countersink them flush into the underside of the body.
What total weight components are included in the Precision Tungsten Incremental Weight Kit?
The Precision Tungsten Incremental Weight Kit includes three 1/2 oz (14.1 g) weights, two 3/16 oz (5.31 g) weights, two 1/16 oz (1.77 g) weights, 4 mounting screws, and 3 spacers.