Remote ID Dronetag Beacon V2 Broadcast Remote ID Device
Remote ID Dronetag Beacon V2 Broadcast Remote ID Device
Dronetag Beacon Remote ID Device (Version 2)
Overview:
Easily make your existing drone compliant with new governmental regulations with the Dronetag Beacon Remote ID Device. If your drone does not meet current identification requirements, just attach the Dronetag to your UAS body, and you're ready to go.
Dronetag makes your drone compliant with prEN 4709-002 in the EU and ASTM F3411 in the US. It transmits data via Bluetooth, so it is also usable anywhere, but check local laws for confirmation. The Dronetag doesn't hinder flight, as it only weighs 0.56 oz, and it can last for multiple missions with a battery life of up to 16 hours.
In addition to the built-in Bluetooth antenna, Dronetag can receive GNSS signals for accurate positioning. Managing the device is easy via the mobile app and integrated status LEDs.
Features:
- Remote ID Transmission - The compact unit is capable of direct/broadcast Remote ID transmission via Bluetooth with a range of up to 1.86 miles.
- GNSS Positioning - An integrated receiver for accurate drone positioning is compatible with various GNSS constellations, such as GPS, GLONASS, Galileo, and SBAS.
- Use with Any Drone - Using a 3M Dual Lock adhesive fastener, you can easily move Dronetag between drones in your fleet.
Additional Features:
- IP43-rated water and dust resistance
- OTA firmware updates
- Built-in data encryption
- GNSS, pressure altitude measurement, and accelerometer onboard sensors
- Status, Remote ID, and Positioning LED status lights
- Accepts an optional external Bluetooth antenna for better reception
- Warns other pilots during take-off, landing, or if a free-fall occurs
- Works with DJI and Pixhawk controllers via EXT port
Dronetag App
Managing the Dronetag can be done using the integrated status LEDs or the mobile Dronetag app on your smartphone. The app provides the following features:
- Manage device settings
- Check airspace zones
- Plan flights
- Inspect airborne drones with their flight itineraries
- Notify other pilots about airspace hazards
- Show your drone on the flight radar
Compatibility: | Can be used on all remotely piloted aircraft |
Sensor: | GNSS, Barometer, and Accelerometer |
USB I/O: | 1 x Micro-USB (Charging Only) Female Input 1 x USB-C Female Input/Output |
Other Ports: | 1 x MMCX |
Wireless: | Bluetooth / Galileo / GLONASS / GPS |
Mobile App Compatible: | Yes: Android & iOS App Name: Dronetag |
Global Positioning: | Galileo, GLONASS, GPS |
Battery Chemistry: | Lithium-Ion Polymer (LiPo) |
Battery Capacity: | 200 mAh |
Recharge Time: | 2 Hours |
Maximum Battery Life: | 16 Hours |
Operating Current: | 15 mA (Typical) 100 mA (Maximum) |
Environmental Protection: | Dust/Water-Resistant (IP43) |
Operating Temperature: | -4 to 140°F (-20 to 60°C) |
Mounting: | 1 x 3M Dual Lock |
Color: | Black |
Cable Length: | Not Specified by Manufacturer |
Dimensions: | 1.5 x 1 x 0.6" (37 x 26 x 16 mm) |
Weight: | 0.6 oz (16 g) |
Compatibility: | Can be used on all remotely piloted aircraft |
Sensor: | GNSS, Barometer, and Accelerometer |
USB I/O: | 1 x Micro-USB (Charging Only) Female Input 1 x USB-C Female Input/Output |
Other Ports: | 1 x MMCX |
Wireless: | Bluetooth / Galileo / GLONASS / GPS |
Mobile App Compatible: | Yes: Android & iOS App Name: Dronetag |
Global Positioning: | Galileo, GLONASS, GPS |
Battery Chemistry: | Lithium-Ion Polymer (LiPo) |
Battery Capacity: | 200 mAh |
Recharge Time: | 2 Hours |
Maximum Battery Life: | 16 Hours |
Operating Current: | 15 mA (Typical) 100 mA (Maximum) |
Environmental Protection: | Dust/Water-Resistant (IP43) |
Operating Temperature: | -4 to 140°F (-20 to 60°C) |
Mounting: | 1 x 3M Dual Lock |
Color: | Black |
Cable Length: | Not Specified by Manufacturer |
Dimensions: | 1.5 x 1 x 0.6" (37 x 26 x 16 mm) |
Weight: | 0.6 oz (16 g) |
- Choosing a selection results in a full page refresh.
- Opens in a new window.