Learning Center

How to Paint a Lexan Body with Mirror Chrome

🛠️ Tinkerer & STEM DeskBy Tinker Tom 4 min read
Spaz Stix Ultimate Mirror Chrome aerosol paint for polycarbonate RC bodies
Hobbyists since 1978 Written by our staff who race, fly and build Questions? 678-513-4450

🛠️ Tinkerer & STEM DeskBy Tinker TomUpdated September 17, 20268 min read
Spaz Stix Ultimate Mirror Chrome aerosol paint for polycarbonate RC bodies
Spaz Stix Ultimate Mirror Chrome is made for the inside of polycarbonate bodies — view at Atlanta Hobby

Nothing turns heads at the trail or the track like a body you can see your reflection in. Mirror chrome looks like magic, but it's mostly patience and one step that almost everyone gets wrong the first time: the backer.

Here's how we paint a clear Lexan (polycarbonate) body with chrome on our bench, and how to make the finish last.

The Short Answer

To paint a Lexan body with mirror chrome, wash the inside with soap and water, mask the windows, and spray thin coats of chrome on the inside of the body. Then back the chrome with the backer the paint maker specifies so it doesn't wipe away. Paint and tools ship from atlantahobby.com or pick up in Cumming.

  • Paint goes on the inside of a polycarbonate body. The clear plastic protects it.
  • Chrome must be backed. Spaz Stix specifies its Ultimate Black Backer for Mirror Chrome.
  • Thin coats, and practice on scrap before you touch the real body.
Step Product Wait before the next step Tip
Wash and dry Dish soap and warm water Until fully dry Fingerprint oils make paint bead up
Mask Body's window masks or hobby masking tape None Press every edge down firmly
Chrome Spaz Stix Ultimate Mirror Chrome Per the can, between thin coats Light passes; don't flood it
Back Spaz Stix Ultimate Black Backer for Mirror Chrome Per the can Unbacked chrome wipes off
Trim and ream Curved scissors, body reamer Paint fully dry Score, then flex to snap clean

Always follow the dry times printed on the can.

1. Prep the Body

Wash the inside

New bodies have mold-release residue and fingerprints inside. Wash the inside with warm water and a drop of dish soap, rinse well, and let it dry completely. From here on, handle the body by the edges.

Mask the windows and other colors

Most bodies come with window masks. Stick them on the inside, and use Tamiya Masking Tape for stripes or anything that will be a different color. Press every edge down with a fingernail so paint can't creep under.

Leave the overspray film on

The thin film on the outside of the body protects it from overspray and scratches. Leave it on until the very end.

2. Spray the Chrome and Back It

Why the inside?

Polycarbonate paint is made to flex with the body. Painted on the inside, it shows through the clear plastic, and the plastic shields it from rocks and scrapes. That's also why regular spray paint doesn't work: it cracks and flakes the first time the body flexes.

Thin coats of chrome

Shake the can well. Spray light, even passes of Spaz Stix Ultimate Mirror Chrome on the inside, letting each coat flash before the next. Check from the outside as you go. Stop when it looks like a mirror.

Back it, or it won't last

This is the step people skip. Spaz Stix says Ultimate Mirror Chrome must be backed with its Ultimate Black Backer for Mirror Chrome (SZX10200 or SZX10209). Without the backer, the chrome wipes away easily and has no durability. Ask us at the counter or by phone and we'll order the backer for you.

Don't swap backers: a regular black or a general-purpose backer isn't the same product. For other colors, a backer like Spaz Stix High Gloss Black/Backer works well, but follow Spaz Stix's chrome instructions for chrome.

Want colored chrome?

Spaz Stix suggests using Mirror Chrome with its Candy colors for a colored chrome effect. Practice on a scrap piece of polycarbonate first.

3. Trim, Mount and Finish

Trim

Once the paint is fully dry, trim along the cut lines with curved Lexan scissors. For long straight cuts, score the line with a hobby knife and flex the plastic. It snaps clean.

Ream the mounting holes

Use a body reamer to open body-post holes. Start small and work up. A reamer makes a clean round hole where a drill bit can crack the body.

Peel the film and add decals

Now peel the overspray film off the outside. Apply decals to the outside of the body.

Shop tip: if you're painting a rocket or another hard plastic model instead, polycarbonate paints are the wrong choice. See our rocket build-and-paint guide for that.

Conclusion

A clean body, good masking, thin coats of chrome on the inside, and the right backer. That's the whole recipe for a body you can see your reflection in. Shop paint, clear bodies and tools online, or bring your body to our Cumming, GA showroom and we'll help you plan the paint job.

Gear Mentioned in This Guide

Spaz Stix Ultimate Mirror Chrome aerosol

Spaz Stix Ultimate Mirror Chrome

The chrome itself.

Shop now
Spaz Stix High Gloss Black backer aerosol

Spaz Stix High Gloss Black/Backer

For backing regular colors.

Shop now
Tamiya 10mm masking tape

Tamiya Masking Tape, 10mm

Clean stripes and edges.

Shop now
Curved Lexan scissors

Curved Lexan Scissors

Smooth curves around wheel wells.

Shop now
Traxxas body reamer with plastic handle

Traxxas Body Reamer

Clean, round mounting holes.

Shop now

Frequently Asked Questions

How do you get mirror chrome on Lexan?

Spray a polycarbonate mirror chrome like Spaz Stix Ultimate Mirror Chrome on the inside of a clean body in thin coats, then back it with the matching backer. The chrome shows through the clear plastic.

Do I need backing paint for chrome?

Yes. Spaz Stix says its Ultimate Mirror Chrome must be backed with its Ultimate Black Backer for Mirror Chrome (SZX10200 or SZX10209). Without it, the chrome wipes away and has no durability.

Do you paint the inside or outside of an RC body?

The inside. Polycarbonate paints are made to flex with the body from the inside, while the clear plastic protects the finish from scratches.

Can I make colored chrome?

Yes. Spaz Stix suggests using Ultimate Mirror Chrome with its Candy colors for a colored chrome effect. Always test on a scrap piece first.

Can I use regular spray paint on a Lexan body?

No. Regular paints crack and flake when the body flexes. Use paint labeled for polycarbonate, like Tamiya PS or Spaz Stix.

Sources and Further Reading

Atlanta Hobby

Talk to a real hobbyist.

Our staff have been racing, flying and building since 1978. Call, stop by the store, or bring it in for repair.