QuicKRepair Solder Tubes for 1112AWG Wire (6)
$9.99
Skip to product information
QuicKRepair Solder Tubes for 1112AWG Wire (6)
$9.99
No Iron Needed
Quick trackside wire repairs
11-12 AWG Fit
Sized for RC cables
Heat Activated
Simple shrink and solder
In Stock
Trackside Wiring SolutionFast ironless RC electrical repairs
The Racers Edge QuicK-Repair Solder Tubes for 11-12AWG Wire (6) provide a fast and reliable way to fix damaged high-current RC wiring without needing a traditional soldering iron. Designed specifically for standard 11-12 AWG power wires, these repair tubes allow drivers to perform immediate, secure connections at the track, flight line, or workbench.
Effortless Wire RestorationDurable electrical bonds on demand
Fixing cut or stripped brushless motor wires, battery leads, or speed controller lines is effortless with Racers Edge QuicK-Repair Solder Tubes for 11-12AWG Wire. Simply insert the unshielded wire ends into the center of the tube and apply gentle heat with a heat gun or lighter. The internal solder ring melts to create a solid electrical connection, while the clear protective outer tubing shrinks tightly to insulate and strain-relieve the wire joint against short circuits and vibration.
Technical SpecificationsProduct details and compatibility
Part Type
Solder Sleeves / Heat Shrink Connectors
Wire Compatibility
11-12 AWG
Quantity
6 Pieces
Heat Source Required
Heat Gun or Lighter
Material
Polyolefin Tubing & Low-Temp Solder
Application
RC Power Wires & Esc Leads
Key Performance FeaturesEngineered for speed and convenience
Iron-Free RepairsMake strong soldered connections without needing a powered soldering iron
Targeted Gauge FitSized precisely to fit standard 11-12AWG RC electrical cables
Dual-Action ProtectionSimultaneously bonds wires with solder and seals them with shrink tubing
Field ConvenienceEssential emergency repair kit item for pit tables and flight lines
Value PackIncludes six pre-measured solder tubes ready for instant application
Frequently Asked QuestionsEverything you need to know
How do I install the Racers Edge QuicK-Repair Solder Tubes for 11-12AWG Wire?
Strip the unshielded ends of your 11-12 AWG wires, overlap them inside the center solder ring of the Racers Edge QuicK-Repair Solder Tube, and apply heat using a heat gun or lighter until the solder melts and the outer sleeve shrinks securely.
Do I need a traditional soldering iron to use Racers Edge QuicK-Repair Solder Tubes?
No, the Racers Edge QuicK-Repair Solder Tubes for 11-12AWG Wire are engineered to bond using only a direct heat source like a lighter or heat gun, eliminating the need for a bulky soldering iron.
Are Racers Edge QuicK-Repair Solder Tubes suitable for high-current RC applications?
Yes, when applied properly, these solder tubes create a strong soldered electrical joint protected by a tough shrink sleeve suitable for 11-12 AWG power wiring on RC cars, planes, and boats.