Ultra Stick 1.1. ARF
$189.99
Skip to product information
Ultra Stick 1.1. ARF
$189.99
ARF Completion
Install Your Preferred Electronics
Wood Construction
Lightweight Stiff Balsa Frame
43.3in Wingspan
Compact Yet Capable Size
3S & 4S Ready
Accepts Standard LiPo Packs
Fast Assembly
Simple Bolt Together Design
Flap Capable
Optional Crow And Flaperon Setup
Legendary Balsa PerformanceIconic Aerobatic Sport Flyer Updated
The E-flite Ultra Stick 1.1m ARF brings back the legendary flight characteristics of the iconic Mini Ultra Stick in an updated and slightly larger design. Built with premium lightweight wood construction, this versatile RC plane delivers unmatched airframe rigidity and agility that foam models simply cannot replicate. Ideal for intermediate to experienced pilots, it offers mild-to-wild performance with versatile 3S or 4S LiPo power systems.
Versatile Everyday Sport AirplanePrecision Engineering Meets Versatile Aerobatics
Based on the renowned Hangar 9 design, the E-flite Ultra Stick 1.1m ARF is the perfect first wood aircraft or daily sport flyer. Its lightweight, stiff, built-up balsa structure allows for crisp aerobatic maneuvers, basic to mild 3D aerobatics, and extremely stable slow-speed characteristics for smooth landings. As an Almost-Ready-To-Fly aerobatic RC plane, it features a fast, bolt-together assembly with no glue or special tools needed, letting you drop in your choice of brushless motor, ESC, receiver, and servos. Featuring oversized control surfaces, a one-piece wing held by a single thumbscrew, steerable tailwheel, and optional flap/crow setup capabilities, this aerobatic model delivers pure flying enjoyment on any flying field surface.
Technical SpecificationsDetailed Aircraft Parameters And Requirements
Completion Level
Almost Ready-To-Fly
Wingspan
43.31" (1100 mm) (ruler)
Overall Length
39.1" (993 mm) (ruler)
Flying Weight
31.7oz (898g) without Battery (scale)
Motor Size
Recommended 3534-1000KV
Speed Control
Sold Separately
Radio
Full-range 4–7+ Channel Transmitter
Servos
4 or 6 Sub Micro Servos (Sold Separately) (gear)
CG
Refer to Product Manual
Recommended Battery
3S 11.1V or 4S 14.8V 2200–3200mAh LiPo with EC3 or IC3 Connector
Assembly Time
1-3 Hours
Flaps
Optional
Retracts
No
Material
Wood
Propeller Size
10 x 5E (Not Included) (propeller)
Power Type
Electric
Skill Level
Level 3
Trim Scheme Colors
Red, White, Black
High Performance FeaturesEngineered For Mild To Wild Aerobatics
Balsa ConstructionLightweight and stiff built-up wood frame for the E-flite Ultra Stick 1.1m ARF
Bolt-Together AssemblyFast setup with no glue, tape, or special tools required
Electronics CustomizationChoose your own brushless motor, ESC, and servo components
Advanced Wing DesignSymmetrical airfoil with optional crow or flap configurations
Large Control SurfacesExpanded surface area for mild-to-wild 3D flight capabilities
Rugged Landing GearSteerable tailwheel and large tires for grass field takeoffs
Easy TransportOne-piece wing secured quickly with a single thumbscrew
Frequently Asked QuestionsEverything you need to know
What electronics do I need to complete the E-flite Ultra Stick 1.1m ARF?
To complete the E-flite Ultra Stick 1.1m ARF, you will need a 250–500W brushless outrunner motor (such as a 3534-1000KV), a matching ESC, 4 to 6 sub-micro servos, a full-range 4+ channel transmitter and receiver, a 3S or 4S 2200–3200mAh LiPo battery with compatible charger, and a 10x5E propeller.
Is the E-flite Ultra Stick 1.1m ARF suitable for RC airplane beginners?
The E-flite Ultra Stick 1.1m ARF is designed for intermediate to experienced RC pilots (Skill Level 3). While its flight stability makes landing easy, its high aerobatic agility and requirement for custom equipment installation make it best suited for pilots with previous flight experience.
Can I add flap or crow mixing to the E-flite Ultra Stick 1.1m ARF?
Yes, the wing structure on the E-flite Ultra Stick 1.1m ARF is ready to accept two additional wing servos, enabling specialized setups like flaps, crow (butterfly), full-span ailerons, flaperons, or spoilerons.
How long does it take to assemble the E-flite Ultra Stick 1.1m ARF?
Assembly of the E-flite Ultra Stick 1.1m ARF takes approximately 1 to 3 hours because the airframe features a fast bolt-together design that requires no glue or tape.