Adapter: IC5 Parallel Harness 6" 10 awg
$14.99
Skip to product information
Only 1 Left!
Adapter: IC5 Parallel Harness 6" 10 awg
$14.99
Dual IC5 Plugs
Connect two batteries easily
10 AWG Wire
Ultra low resistance cable
Parallel Power
Double capacity same voltage
In Stock
Double Your CapacityHigh Current Dual Battery Adapter Cable
The Parallel Y-Harness: IC5 Battery with 6" Wires, 10 AWG is engineered to connect two identical RC LiPo batteries in a parallel circuit. By wiring your power setup in parallel, you effectively double your overall run time while maintaining the same voltage level across your system.
Heavy-Duty Power TransferEngineered for High Performance RC Vehicles
Constructed with high-strand 10 AWG silicone wire, the Parallel Y-Harness: IC5 Battery with 6" Wires minimizes resistance and ensures maximum current transfer to your electronic speed control. Featuring heavy-duty IC5 connectors that are fully backward compatible with standard EC5 plugs, this heavy-duty adapter is ideal for power-hungry brushless RC cars, trucks, and boats requiring extra battery capacity without increasing cell count.
Technical SpecificationsAdapter Cable and Wire Details
Part Type
Parallel Adapter Harness
Connector Type
Dual IC5 / EC5 Compatible
Wire Gauge
10 AWG Silicone
Wire Length
6 Inches
Circuit Type
Parallel Wiring
Compatible Battery
Identical Cell Count IC5/EC5 LiPo Packs
Placement/Position
Battery to ESC Connection
Key FeaturesBuilt for Safety and Performance
Parallel CircuitDoubles milliamp hour capacity while maintaining voltage
IC5 ConnectorsHigh-current plugs compatible with IC5 and EC5 equipment
10 AWG CableHeavy-duty silicone wire minimizes heat and voltage drop
6-Inch LengthOffers generous clearance and flexibility inside battery trays
Heavy-Duty JointsSolder joints fully protected for long-lasting durability
Frequently Asked QuestionsEverything you need to know
What does the Parallel Y-Harness: IC5 Battery with 6" Wires, 10 AWG do?
The Parallel Y-Harness: IC5 Battery with 6" Wires, 10 AWG connects two identical batteries together in a parallel circuit, which doubles your total battery capacity (mAh) for longer run times while keeping the output voltage unchanged.
Do I need to use identical batteries with the Parallel Y-Harness: IC5 Battery with 6" Wires, 10 AWG?
Yes, you must always use two identical batteries with the same voltage, capacity, cell count, and state of charge when using the Parallel Y-Harness: IC5 Battery with 6" Wires, 10 AWG to avoid damage to your batteries.
Is the Parallel Y-Harness: IC5 Battery with 6" Wires, 10 AWG compatible with EC5 connectors?
Yes, IC5 connectors are fully backward compatible with standard EC5 connectors, allowing you to use this adapter with both IC5 and EC5 power setups.