E-flite Eratix 3D FF (Flat Foamy) 860mm BNF Basic with AS3X and SAFE Select (EFL01950)
$249.99
Skip to product information
Low StockIn Stock
E-flite Eratix 3D FF (Flat Foamy) 860mm BNF Basic with AS3X and SAFE Select (EFL01950)
$249.99
In Stock
Arrives
This item ships free.
Pick up today in Cumming, usually ready in 2 hours.
BNF Basic
Bind and fly convenience
3S Brushless
Power for extreme aerobatics
AS3X & SAFE
Exclusive flight stabilization technology
Durable EPP
Lightweight carbon reinforced airframe
Fast Assembly
No glue or tape required
860mm Wingspan
Ideal for indoor outdoor flying
Unmatched 3D AerobaticsEffortless flat foamy performance anywhere
The E-flite Eratix 3D FF 860mm BNF Basic brings back the legendary agility of flat foamy RC planes without the complex setup of traditional builds. Engineered for both indoor gymnasiums and outdoor flying fields, this factory-assembled model offers incredible flight stability and aggressive 3D aerobatics out of the box.
Precision Aerobatic FlightFactory assembled power and control
Experience incredible precision with the E-flite Eratix 3D FF. Powered by a factory-installed 3S-compatible brushless motor, 15A Spektrum Avian Smart ESC, and digital sub-micro servos, this aerobatic RC airplane delivers an exceptional thrust-to-weight ratio for hovering and slow-speed maneuvers. Constructed from ultra-durable carbon-reinforced EPP foam, the airframe bolts and snaps together in under an hour without needing glue or tape. Integrated AS3X and SAFE Select technology ensures rock-solid stabilization in wind, making high-alpha hovers and sport flying accessible to intermediate and experienced pilots alike.
Aircraft SpecificationsDetailed technical measurements and equipment
Completion Level
Bind-N-Fly Basic
Wingspan
34" (864 mm) (ruler)
Overall Length
35.69" (907 mm) (ruler)
Flying Weight
13.3oz (376g) (scale)
Motor Size
2405-1200KV Brushless Outrunner
Speed Control
Spektrum Avian 15A Smart ESC
Radio
Full-Range 4+ Channel Spektrum DSMX/DSM2 (Sold Separately) (signal)
Servos
(3) Spektrum Sub-Micro Digital Servos (gear)
CG (Center of Gravity)
Refer to Manual
Recommended Battery
3S 11.1V 600–850mAh LiPo with IC2 Connector
Assembly Time
Less than 1 Hour
Flaps
No
Retracts
No
Material
High-Density EPP Foam
Propeller Size
9x4.6 Electric Slow Fly
Connector Type
IC2
Skill Level
Level 2
Key CapabilitiesEngineered for high performance flight
Flight EnvelopeCapable of slow cruising, sport flying, and extreme 3D aerobatics
Power SystemFactory-installed 2405-1200KV brushless motor tuned for 3S LiPo
Smart Telemetry15A Spektrum Avian ESC provides real-time voltage and RPM data
Flight ReceiverSpektrum AR630 receiver with DSMX tech and fly-by telemetry
StabilizationExclusive AS3X and optional-use SAFE Select flight protection
Durable BuildHigh-density EPP foam reinforced with composite and carbon fiber (armored)
No-Glue AssemblyFast snap-and-bolt assembly takes less than an hour
High VisibilityBright factory-applied high-contrast trim scheme for orientation
Parts & Accessories
To run this model you’ll need:
Suggested:
Frequently Asked QuestionsEverything you need to know
What battery is recommended for the E-flite Eratix 3D FF 860mm?
The E-flite Eratix 3D FF 860mm performs best using a 3S 11.1V 600–850mAh LiPo battery fitted with an IC2 connector.
Do I need glue to assemble the E-flite Eratix 3D FF 860mm BNF Basic?
No, the E-flite Eratix 3D FF 860mm features a snap and bolt assembly system that requires no glue or tape and can be completed in under an hour.
Is the E-flite Eratix 3D FF 860mm suitable for RC flight beginners?
The E-flite Eratix 3D FF is categorized as a Skill Level 2 aircraft, making it ideal for intermediate pilots progressing into 3D aerobatics rather than first-time beginners.
What transmitter do I need for the E-flite Eratix 3D FF 860mm BNF Basic?
You will need a full-range 4 to 5+ channel Spektrum DSMX/DSM2 compatible transmitter, such as the Spektrum DXS, NX6, or higher.
Customers Also Bought
No related products found.