Hitec HS485HB Standard Deluxe Sx, Karbonite Gear, BB
$28.99
Skip to product information
Hitec HS485HB Standard Deluxe Sx, Karbonite Gear, BB
$28.99
In Stock
Karbonite Gear Train
Four Times Stronger Than Plastic
Top Ball Bearing
Smooth Operation And Precise Centering
Powerful Torque Output
Delivers Up To 76 Oz-In
Precision Motion ControlReliable Power For RC Models
The Hitec HS-485HB Standard Deluxe Servo offers exceptional durability and precision for a wide variety of RC cars, RC aircraft, and RC boats. Featuring revolutionary Karbonite gears that are four times stronger than standard nylon gears, this analog servo provides smooth operation and long-lasting performance. Designed with a top ball bearing supported output shaft, the Hitec HS-485HB delivers incredible holding power and accurate control response.
Engineered For Heavy DutyUnmatched Value And Lasting Reliability
Upgrade your radio control setup with the high-performance Hitec HS-485HB Standard Deluxe Servo. Built around a robust 3-pole ferrite motor and backed by an ultra-durable Karbonite gear set, this standard-sized servo motor resists wear and gear striping under heavy loads. Operating efficiently between 4.8V and 6.0V, it provides up to 76 oz-in of torque and a swift 0.18 sec/60° transit speed at 6.0V. Whether you are outfitting a sport airplane, steering a 1/10 scale off-road buggy, or controlling throttle linkage, the Hitec HS-485HB is an essential component for hobbyists seeking dependable, budget-friendly motion control.
Technical Data SheetDetailed Specifications And Operating Limits
Compatible Vehicles
1/10 Scale RC Cars, Sport Aircraft, RC Boats, and Robotics
Part Type
Standard Deluxe Analog Servo
Material
Karbonite Gears / Plastic Case
Placement/Position
Steering, Throttle, or Control Surfaces
Dimensions
1.50" x 0.80" x 1.40"
Weight
1.40 oz (39 g) (scale)
Operating Voltage
4.8V - 6.0V
Operating Speed (4.8V)
0.23 sec/60 deg at no load
Operating Speed (6.0V)
0.18 sec/60 deg at no load
Stall Torque (4.8V)
61 oz/in (4.3 kg.cm) (wrench)
Stall Torque (6.0V)
76 oz/in (5.5 kg.cm) (wrench)
Current Drain (4.8V)
8mA idle / 150mA no load operating
Current Drain (6.0V)
8.8mA idle / 180mA no load operating
Bearing Type
Top Ball Bearing, Lower Bushing
Gear Type
Karbonite Gears
Motor Type
3 Pole Ferrite Motor
Potentiometer Drive
Indirect Drive
Control System
+Pulse Width Control 1500us Neutral
Required Pulse
3-5 Volt Peak to Peak Square Wave
Operating Temperature Range
-20 to +60 Degree C
Operating Angle
45 Deg one side pulse traveling 400us
360 Modifiable
Yes
Direction
Clockwise / Pulse Traveling 1500 to 1900us
Dead Band Width
8us
Connector Wire Length
11.81" (300mm) (link)
Core Performance AttributesKey Advantages Of Karbonite Gearing
Karbonite Gear TrainProvides four times the strength of standard plastic gears to prevent gear failure
Top Ball Bearing SupportEnsures minimal friction and smooth output shaft performance
High-Torque PerformanceDelivers up to 76 oz-in of stall torque at 6.0 Volts
Standard Mounting FootprintFits into almost any standard servo bay across various hobby platforms
Wide Voltage RangeDesigned to perform optimally between 4.8V and 6.0V battery packs
Modifiable DesignSupports 360-degree modification for robotics and special continuous rotation uses
Frequently Asked QuestionsEverything you need to know
What type of gears are used in the Hitec HS-485HB Standard Deluxe Servo?
The Hitec HS-485HB Standard Deluxe Servo features heavy-duty Karbonite gears, which are virtually indestructible and four times stronger than standard nylon plastic gears.
What operating voltage does the Hitec HS-485HB Standard Deluxe Servo support?
The Hitec HS-485HB Standard Deluxe Servo operates efficiently on a voltage range between 4.8V and 6.0V, providing maximum speed and torque at 6.0V.
Can the Hitec HS-485HB Standard Deluxe Servo be modified for continuous 360-degree rotation?
Yes, the Hitec HS-485HB Standard Deluxe Servo is 360-degree modifiable, making it an excellent choice for custom robotics projects and sail winches.
What RC applications is the Hitec HS-485HB Standard Deluxe Servo best suited for?
The Hitec HS-485HB Standard Deluxe Servo is ideal for 1/10 scale RC cars, sport RC airplanes, RC boats, and general robotics or throttle controls.