Park 480 Brushless Outrunner Motor, 1020Kv
$69.99
Skip to product information
Only 1 Left!
Park 480 Brushless Outrunner Motor, 1020Kv
$69.99
1020Kv Rating
Efficient electric power delivery
275 Watts
High power output capability
14-Pole Design
High torque direct drive
4mm Shaft
Reversible hardened steel shaft
3.5mm Bullets
Pre-installed gold bullet connectors
Complete Kit
Includes mount and hardware
In Stock
Electric Flight PowerHigh Torque Outrunner Motor Performance
The Park 480 Brushless Outrunner Motor, 1020Kv delivers clean, quiet, and high-torque performance for 3D park flyers weighing 20 to 30 ounces and scale park flyers up to 35 ounces. Capable of outputting up to 275 watts of continuous power, this lightweight RC airplane motor provides immediate throttle response for demanding maneuvers. It is an exceptional choice for popular models such as the Mini Edge 3D ARF, Mini Funtana 3D ARF, and Mini Ultra Stick ARF.
Optimized Aerobatic PerformanceVersatile Brushless Power for Park Flyers
Engineered for maximum efficiency and durability, the Park 480 Brushless Outrunner Motor, 1020Kv features a slotted 14-pole external rotor design that serves as a high-torque direct-drive alternative to gearbox setups or inrunner motors. This 1020Kv variant is optimized to handle higher current loads, providing superior efficiency when paired with modern LiPo battery packs. Built with high-quality ball bearings, a 4mm reversible hardened steel shaft, pre-installed 3.5mm bullet connectors, and a complete mounting hardware set, this brushless outrunner motor ensures smooth operation and robust reliability for all your sport and 3D aerobatic flights.
Technical SpecificationsComplete Motor Dimension and Power Data
Bushing Or Bearing
Bearing
Connector Type
3.5mm Bullet
Idle Current (Io)
1.10A @ 8V
Motor Design
Outrunner
Motor Type
Brushless
Recommended Prop Range
10x7 to 12x6
RPM/Volt (Kv)
1020Kv
Outer Diameter
1.4 in (35mm) (ruler)
Shaft Diameter
4mm (.16 in) (ruler)
Voltage
7.2V to 12V
Part Type
Electric Motor
Compatible Vehicles
Mini Edge 3D ARF (EFL2225), Mini Funtana 3D ARF (EFL2075), Mini Ultra Stick ARF (EFL2250) (airplane)
Key FeaturesDesigned for Ultimate Flight Efficiency
Direct-Drive TorqueHigh-torque slotted 14-pole outrunner design
Power OutputContinuous power delivery up to 275 watts
Reversible Shaft4mm hardened steel shaft easily reverses for custom mounting
Hardware IncludedPackage includes motor mount, prop adapters, and hardware
3D Flying WeightFits 3D park flyers weighing 20 to 30 oz
Scale Flying WeightIdeal for scale park flyers weighing 25 to 35 oz
Bullet ConnectorsComes with pre-installed 3.5mm bullet connectors
Smooth OperationPrecision construction with dual high-quality ball bearings
Frequently Asked QuestionsEverything you need to know
What ESC and battery are recommended for the Park 480 Brushless Outrunner Motor, 1020Kv?
The Park 480 Brushless Outrunner Motor, 1020Kv performs best when paired with a 25A to 40A brushless ESC and a 2S to 3S Li-Po battery pack (or a 6- to 10-cell Ni-MH/Ni-Cd battery).
What propeller size should I use with the Park 480 Brushless Outrunner Motor, 1020Kv?
Recommended propeller sizes for the Park 480 Brushless Outrunner Motor, 1020Kv range from 10x7 to 12x6, depending on your aircraft's weight and desired flight speed.
Is the shaft on the Park 480 Brushless Outrunner Motor, 1020Kv reversible?
Yes, the 4mm hardened steel shaft on the Park 480 Brushless Outrunner Motor, 1020Kv can easily be reversed to support various front or rear firewall motor installations.