Hangar 9 Ultra Stick 10cc ARF 60" (HAN2345)
$279.99
Skip to product information
Hangar 9 Ultra Stick 10cc ARF 60" (HAN2345)
$279.99
10cc Power
Gas Glow or Electric
Quad Control
Flap and Aileron Versatility
ARF Level
Almost Ready to Fly
60-Inch Wingspan
Stable Symmetrical Aerofoil Profile
3D Capable
Large Double Bevel Surfaces
Float Ready
Optional Float Set Support
Unmatched Flight VersatilityThe Ultimate All Round Aircraft
The Hangar 9 Ultra Stick 10cc ARF 60" is a highly versatile RC plane designed for sport aerobatics, high-speed passes, and aggressive 3D maneuvers. Power options range from 10cc gas/glow engines to high-efficiency brushless electric motor systems without compromising stability or extreme aerobatic performance.
Engineered For Peak PerformanceCraftsmanship Meets Modern Precision Aerodynamics
Experience sheer flying joy with the Hangar 9 Ultra Stick 10cc ARF 60" sport airplane. Featuring double-bevel hinged control surfaces and a quad-surface wing design, this scale model allows pilots to execute crisp roll rates, tight loops, and precision touch-and-go landings all in a single flight. Built with top-shelf materials and a symmetrical wing profile, the Hangar 9 Ultra Stick 10cc penetrates wind effortlessly while providing a rock-solid platform for sport and 3D RC pilots alike.
Technical SpecificationsDetailed Standard Airframe Specs
Completion Level
Almost-Ready-to-Fly (ARF) (wrench)
Wingspan
60.0 in (1524 mm) (ruler)
Overall Length
57.0 in (1448 mm) (ruler)
Flying Weight
7.0 - 9.0 lbs (3.2 - 4.1 kg) (weight)
Motor Size
10cc Gas/Glow or Electric Equivalent
Speed Control
60A - 80A ESC (Electric Option) (lightning)
Radio
6+ Channel Full-Range System
Servos
(7) Standard-Size Servos (6 for Electric) (gear)
CG (Center of Gravity)
Per Product Manual
Recommended Battery
4S-6S LiPo or Rx Battery
Assembly Time
7-10 Hours
Flaps
Yes (Quad-Surface Wing) (sliders)
Retracts
No
Material
Balsa and Plywood Construction
Key Airplane FeaturesDesigned For Ultimate Versatility
Power VersatilityCompatible with gas, glow, or electric brushless power plants
Control SurfacesDouble-bevel hinged surfaces deliver high deflection for 3D maneuvers
Quad-Surface WingsQuad control setup enables blinding roll and loop rates
Easy MountingIncluded firewall template simplifies engine or motor placement
Complete HardwareIncludes all required assembly hardware for a smooth build
Float ReadyMounting points pre-configured for optional float set
Wind PenetrationFully-symmetrical wing profile provides superior stability
Parts & Accessories
To run this model you’ll need:
Suggested:
Frequently Asked QuestionsEverything you need to know
What power options can I use on the Hangar 9 Ultra Stick 10cc ARF 60"?
The Hangar 9 Ultra Stick 10cc ARF 60" is designed to accept 10cc two-stroke or four-stroke gas/glow engines, as well as equivalent electric brushless power systems.
What equipment is needed to complete the Hangar 9 Ultra Stick 10cc ARF 60"?
You will need a 6+ channel transmitter and receiver, 6 to 7 standard servos, a 10cc engine or brushless motor system with ESC, a matching propeller, and receiver/ignition batteries.
Is the Hangar 9 Ultra Stick 10cc ARF 60" capable of 3D flight?
Yes, thanks to its large double-bevel hinged control surfaces and quad-surface wing options, the Hangar 9 Ultra Stick 10cc ARF 60" excels at precision 3D maneuvers and rapid roll rates.
Can I install floats on the Hangar 9 Ultra Stick 10cc ARF 60"?
Absolutely. The Hangar 9 Ultra Stick 10cc ARF 60" airframe easily bolts onto an optional lightweight float set for water takeoffs and landings.
Customers Also Bought
No related products found.