Hangar 9 UltraCote, Bright Yellow (HANU872)
$22.99
Skip to product information
Hangar 9 UltraCote, Bright Yellow (HANU872)
$22.99
Polyester Material
High tech polymerizing film matrix
Lightweight Design
Weighs point three ounces sqft
Fuel Proof Finish
Resists gas glow and smoke
Multi Temp System
Controlled adhesive and shrinkage process
Bright Yellow Hue
Vibrant permanent fused color layer
Superior Contour
Easily stretches around tight curves
Vibrant Model FinishPremium Protection For RC Aircraft
Transform your RC airplane with the premium Hangar 9 UltraCote, Bright Yellow high-tech polyester covering film. Featuring an advanced multi temperature-controlled adhesive system, this lightweight model airplane covering makes achieving a professional, wrinkle-free finish effortless on tight curves and wingtips. Designed for maximum longevity, it provides exceptional resistance to fuel, smoke oil, and water while granting your aircraft outstanding field visibility.
Advanced Covering TechnologyEngineered For Durability And Flawless Results
The Hangar 9 UltraCote, Bright Yellow covering film revolutionizes model aircraft finishing through its patented polymerizing process that permanently fuses color directly into the polyester substrate. This unique process eliminates color-layer separation while allowing builder repositioning during installation. Weighing just 0.3 oz per square foot, this RC airplane covering offers superior flexibility, stretching and shrinking precisely with heat application to cover complex contours. Fully fuel-proof and waterproof, it reliably shields balsa wood airframes against glow fuel, gasoline, and smoke oil exposure.
Technical SpecificationsDimensions And Temperature Guidelines
Compatible Vehicles
Balsa and Wood RC Airplane Models
Part Type
Covering Film
Material
High Tech Polyester
Placement/Position
Exterior Aircraft Surface
Dimensions
6.5 ft (78 in) Length x 23.5 in Width (ruler)
Weight
0.3 oz per square foot
Adhesion Temperature Range
200°F to 220°F
Shrinkage Onset Temperature
300°F
Maximum Shrinkage Temperature
350°F
Key Finish AttributesBuilt For Builders Seeking Perfect Finishes
Material ConstructionHigh-tech polyester covering film
Adhesive MatrixUnique multi temperature-controlled system
Color FusingPatented process eliminates layer separation
Versatile HandlingSuperior stretch and shrinkage over compound curves
Fuel ResistanceFully proof against glow fuel, gas, and smoke oil
Easy RepositioningRe-heatable adhesive permits effortless adjustments
Ultra LightweightWeighs only 0.30 oz/sq. ft. for minimal flight impact
Frequently Asked QuestionsEverything you need to know
How do I apply Hangar 9 UltraCote, Bright Yellow to my RC airplane?
Use a temperature-controlled sealing iron set between 200°F and 220°F to adhere Hangar 9 UltraCote, Bright Yellow to the balsa wood framework. Once attached, increase heat to 300°F–350°F using a heat gun or iron to shrink and tighten the covering.
Is Hangar 9 UltraCote, Bright Yellow resistant to glow fuel and gasoline?
Yes, Hangar 9 UltraCote, Bright Yellow is engineered to be completely fuel-proof against glow fuel, gasoline, and smoke oil, as well as being fully waterproof.
Can Hangar 9 UltraCote, Bright Yellow be repositioned during installation?
Yes, thanks to its patented polymerizing process, Hangar 9 UltraCote, Bright Yellow can be reheated and repositioned on your model aircraft without risking color-layer separation.