1/24 AX24 XC-1 4WS Crawler Brushed RTR, Green
$159.99
Skip to product information
1/24 AX24 XC-1 4WS Crawler Brushed RTR, Green
$159.99
4-Wheel Steering
Three Selectable Steering Modes
1/24 Micro Scale
Compact Indoor Outdoor Capability
Ready To Run
Includes Battery And Charger
88T Brushed Motor
High Torque Trail Performance
Side Plate Chassis
Maximum Articulation And Clearance
LED Rock Lights
Illuminates Low Light Trails
Unmatched Micro Terrain CapabilityConquer Extreme Crawling Obstacles Anywhere
The Axial AX24 XC-1 4WS Crawler redefines micro RC crawling performance with exceptional stability, extreme articulation, and four-wheel steering versatility. Built for both indoor courses and rugged outdoor trails, this 1/24 scale ready-to-run RC crawler empowers enthusiasts to maneuver through tough lines and obstacle courses right out of the box.
Revolutionary Trail PerformanceAdvanced Steering Design Meets Legendary Crawling Heritage
Engineered for extreme trail enthusiasts, the Axial AX24 XC-1 4WS Crawler features a highly capable 4-wheel steering system with three transmitter-activated modes: traditional front steering, mirrored rear steering, and crab crawling. Homaging the iconic AX10 crawler, the 1/24 scale Axial AX24 XC-1 incorporates a side-plate chassis design, long-travel coilover shocks, and a 4-link suspension setup to maintain wheel contact on rough terrain. Powered by a high-torque Dynamite 88T brushed motor and backed by worm gear lockers, full ball bearings, and sticky Rock Lizards tires, this micro 4WD rock crawler delivers smooth power and unmatched clearance. Complete with a 2.4GHz transmitter, LiPo battery, and USB charger, it offers the ultimate Ready-To-Run micro crawler experience for hobbyists of all skill levels.
Technical Performance BreakdownPrecision Specs Built For Crawling
Completion Level
Ready-To-Run
Drivetrain
4WD
Motor Size
Dynamite 88T
Power Type
Electric
Differential
Worm Gear 16T/4T
Vehicle Size
Micro
Product Width
4.5 in (114mm) (ruler)
Product Height
3.7 in (94mm) (ruler)
Product Length
7.8 in (198mm) (ruler)
Ground Clearance
1.3 in (34mm) (ruler)
Wheelbase
5.3 in (135mm) (ruler)
Front Track
4.5 in (113mm) (ruler)
Rear Track
4.5 in (113mm) (ruler)
Charger
0.5A USB Charger Included
Connector Type
PH 2.0 High-Current Ultra Micro
Spur Gear
55T
Pinion
11T
Speed Control
Spektrum 2-in-1 ESC/Receiver Included
Servo
Dual Axial AS-1 Servos Included
Vehicle Type
Rock Crawler
Top Speed
Scale Trail Crawling Speed
Battery Type
2S 7.4V 350mAh LiPo Included
LiPo Compatibility
2S Compatible
Drive Type
Forward/Brake/Reverse
Shock Type
Plastic Coil-Over 1.35-2.0 in
Body
XC-1 Screened Polycarbonate
Wheel Width
0.5 in (12.5mm) (gear)
Motor Class
88T Brushed Electric Motor
Radio
Spektrum SLT3 2.4GHz 3-Channel Included
Assembly Time
None Required
Scale
1/24
Motor Type
Brushed
Power System
2S Brushed Electric
Chassis
Side Plate Design
Tire Tread
Axial Rock Lizards
Recommended Battery
Dynamite 350mAh 2S LiPo (Included) (battery)
Ball Bearings
Full Vehicle Sealed Bearings
Receiver
Spektrum 2-in-1 Combo Receiver
Trail-Dominating FeaturesEngineered For Peak Terrain Conquering
Steering Control3-Mode Transmitter-Selectable 4WS System
Chassis DesignFlat Side Plate Chassis with Rock Sliders
Lighting SystemFactory Installed Slider LED Rock Lights
Suspension4-Link Front/Rear Suspension with Long-Travel Shocks
Drivetrain LockersHigh Clearance Worm Gear Axle Lockers
Traction PackageRockster Wheels with Rock Lizards Tires
Solid ConstructionSteel Axles, Stub Axles, and Dogbones
Maintenance AccessEasy Hinged Body Access System
Frequently Asked QuestionsEverything you need to know
Is the Axial AX24 XC-1 4WS Crawler ready to run out of the box?
Yes, the Axial AX24 XC-1 4WS Crawler comes fully assembled with a transmitter, 2S LiPo battery, USB charger, and transmitter batteries included.
How does the 4-wheel steering work on the Axial AX24 XC-1?
The steering system on the Axial AX24 XC-1 offers three transmitter-selectable modes: standard front steering, mirrored rear-wheel steering for tight turning radiuses, and crab crawl mode for sidestepping obstacles.
What battery and charger come with the Axial AX24 XC-1 4WS Crawler?
The Axial AX24 XC-1 includes a Dynamite 350mAh 2S 7.4V LiPo battery along with a convenient 0.5A USB charger.
Can the Axial AX24 XC-1 4WS Crawler be used indoors?
Yes, the compact 1/24 scale design of the Axial AX24 XC-1 makes it ideal for indoor crawling over obstacles like pillows and books, as well as outdoor terrain.