Pine Car Center of Gravity System Kit
$19.99
Skip to product information
Only 3 Left!
Pine Car Center of Gravity System Kit
$19.99
Dense Tungsten
Maximum Mass Compact Size
Screw-In Design
Adjust CoG On The Fly
Complete Kit
Drill Bit And Tool Included
In Stock
Master Your BalanceUnlock Maximum Pinewood Derby Speed
Optimize your pinewood racer balance with the Pine Car 1/2 oz. Weights Tungsten CoG Screw-In Type (4) kit. By utilizing high-density tungsten tuning weights, you can easily shift and fine-tune your center of gravity (CoG) for optimal track stability and maximum velocity. Designed for quick adjustments, this performance kit gives derby builders the ultimate competitive edge.
Precision Center Of Gravity TuningFine Tune Your Car For Peak Velocity
Achieving victory on the derby track requires precise weight distribution. The Pine Car 1/2 oz. Weights Tungsten CoG Screw-In Type (4) allows builders to place weight precisely 1/2 inch to 1 inch forward of the rear axle, which is proven to yield maximum momentum. High-density tungsten is significantly heavier than lead or zinc, allowing you to pack critical mass into tight, streamlined chassis locations. The included 3/8 inch drill bit and 1/8 inch adjustment tool make installation and fine-tuning straightforward, ensuring your Pinewood Derby car performs at its absolute best during race day trials.
Technical DataSpecifications For Derby Weight Systems
Compatible Vehicles
Pinewood Derby & PineCar Racers
Part Type
Center of Gravity Weights
Material
High-Density Tungsten (metal)
Placement/Position
Chassis Underbody
Total Weight
1.0 oz total (2 x 0.5 oz weights) (weight)
Included Accessories
3/8" Drill Bit (1/4" Shank), 1/8" Adjustment Tool (tool)
Dimensions
Compact Screw-In Cylinders
Safety Notice
Adult Supervision Required - Choking Hazard
Derby Winning FeaturesBuilt For Easy Fine Tuning
High-Density TungstenPacks maximum weight into minimal chassis space
Screw-In SystemEasily adjust position on the fly with included tool
Optimized Center of GravityFine-tune balance 1/2 to 1 inch forward of rear axle
Included Drill BitComes with a 3/8 inch bit featuring a 1/4 inch shank
Complete Tuning SetIncludes two 0.5 oz weights and full adjustment hardware
Speed & StabilityEnhances straight-line performance and reduces track wobble
Frequently Asked QuestionsEverything you need to know
How do I install the Pine Car 1/2 oz. Weights Tungsten CoG Screw-In Type (4)?
Use the included 3/8 inch drill bit (with a 1/4 inch shank) to drill mounting holes into your pinewood racer chassis, then screw in the tungsten weights using the provided 1/8 inch adjustment tool.
Why is tungsten used in the Pine Car 1/2 oz. Weights Tungsten CoG Screw-In Type (4) instead of lead?
Tungsten is much denser than lead or zinc, allowing you to place more mass in a much smaller area of your car to optimize the center of gravity without ruining sleek body aerodynamics.
Where should I position the Pine Car 1/2 oz. Weights Tungsten CoG Screw-In Type (4) on my derby car?
For ideal track performance and stability, position the weights so that your car's overall center of gravity rests approximately 1/2 inch to 1 inch forward of the rear axle.